Advanced Memory Dialing Features
21
Two-Part Tone Dialing
Your phone provides the standard Dual Tone Multi-
Frequency (DTMF) signals typically used to access
alternate long distance services, signal pagers, answering
machines, etc. Generally, these services use a two-part
procedure: First, a call is placed from memory or by using
the keypad to a central telephone number. Then, you either
receive a secondary dial tone, or are prompted to enter
additional digits, such as a pager number, calling card
number, etc.
To tone dial from the keypad, make the initial call, either
from memory or by using the keypad. When prompted,
enter additional tone digits using the keypad. The tones are
automatically sent as you press the keys. Do not press
.
To tone dial from memory, make the initial call, either
from memory or by using the keypad. When prompted,
recall from memory (using , location number) the
number you wish to send as DTMF digits. Press , .
Repeat these steps as required to send additional groups of
numbers.
Memory Linking
The Memory Linking feature provides improved
convenience when dialing constant number sequences,
such as when accessing paging systems, retrieving voice
mail, etc. It allows multiple number groups (e.g., main
number, bank PIN code, and account number) to be stored
in a single memory location, each group separated by a
pause (

o

). Pauses are created by pressing , . You
may then place a call using this memory location, and
sequentially transmit each number group (by pressing
, ) at the appropriate system prompt.
SND
RCL
RCL SND
FCN SND
RCL SND
MicroTAC_Book Page 21 Thursday, October 16, 1997 1:30 PM
Black spot 45.0° 169.71 LPI