46
Programming Scanning Modes
Scanning ModesThe following table lists the scanning modes available for
your phone.
Scanning Mode Display
Standard Mode
Your phone first seeks a home type system,
then a non-home type.
If home system is
non-wireline
(type A)
If home system is
wireline
(type B)
Std Ab
Std bA
Invert Preference Mode
Your phone first seeks a non-home type
system.
(Select this mode if in a fringe area of your
home system or in certain roaming
situations.)
If home system is non-wireline (type A)
Flashing RM = call on B system
Flashing IU= call on home system
If home system is wireline (type B)
Flashing RM = call on A system
Flashing IU= call on home system
SCAn bA
SCAn Ab
Home Only Mode
Phone will not operate outside its home
system.
HOM<E
Scan A Mode
Phone will operate only within non-
wireline (A) systems.
SCAn A
Scan B Mode
Phone will operate only within wireline
(B) systems.
SCAn b
MicroTAC_Book Page 46 Thursday, October 16, 1997 1:30 PM
Black spot 45.0° 169.71 LPI