KwikNet MPC5200 FEC Device Driver
K
A
DAK
3
3. Configuring the Network
You must define each network that your application supports. You can dynamically add
a network interface at runtime. Alternatively, you can define your network interface in
your KwikNet configuration. Networks defined in this manner will be prebuilt for you
when KwikNet is started.
To add a prebuilt MPC5200 Ethernet network interface definition to your KwikNet
Library, use the KwikNet Configuration Manager to edit your Network Parameter File.
The network parameters are edited on the Networks property page. The layout of the
window is shown below. Follow the directions provided in Chapter 2.4 of the KwikNet
TCP/IP Stack User's Guide.