Motorola MVME5100 Series PCI Expansion Connector, Power Requirements, Board Size, Parallel Port

PCI Expansion Connector

Address/Data: A32/D32/D64

PCI Bus Clock: 33 MHz

Signaling: 5V

Connector: 114-pin connector located on the planar of the MVME5100

Power Requirements

(not including power required by PMC or IMPC modules)

	+5V ± 5%	+12V ± 10%	–12V ± 10%
MVME5100:	3.0 A typ.	8.0 mA typ.	2.0 mA typ.
MVME5100 with	3.2 A typ.,	0.2 A typ.	0.1 A typ.
MVME761:	4.0 A max.	0.5 A max.	0.3 A max.

Board Size

Height: 233.4 mm (9.2 in.)

Depth: 160.0 mm (6.3 in.)

Front Panel Height: 261.8 mm (10.3 in.)

Width: 19.8 mm (0.8 in.)

Max. Component 14.8 mm (0.58 in.)

Height:

Parallel Port

Controller: PC97307

Configuration: 8-bit bi-directional, full IEEE 1284 sup- port; Centronics compatible (minus EPP and ECP on MVME712M)

Modes: Master only

Power Requirements

(additional power load placed on MVME5100 with IPMC installed)

IPMC761IPMC712

+5V:	0.5 A max.	0.5 A max.
+3.3V	0.75 A max.	0.75 A max.
		T r a n s i t i o n M o d u l e s
		Transition Modules

I/O Connectors

	MVME761	MVME712M
Asynchronous	Two, DB-9 labeled as	Three, DB-25 labeled
Serial Ports:	COM1 and COM2	as Serial 1, Serial 2,
		and Serial 3

I P M C M o d u l e s

IPMC Modules

PMC Interface

Address/Data: A32/D32/D64, PMC PN1, PN2, PN3, PN4 connectors

Synchronous Serial Ports:

Two HD-26 labeled as	One, DB-25 labeled as
Serial 3 and Serial 4	Serial 4
(user configurable via
installation of SIMs),
Two 60-pin connectors
on MVME761 planar
for installation of two
SIMs

PCI Bus Clock: 33 MHz

Signaling: 5V

Module Type: Basic, single-wide; P2 I/O

SCSI Bus

Controller: Symbios 53C895A

PCI Local Bus DMA: Yes, with PCI local bus burst

Asynchronous (8-bit 5.0MB/s mode):

Ultra SCSI: 20.0MB/s (8-bit mode), 40.0MB/s (16-bit mode)

Note: 16-bit SCSI operation precludes the use of some PMC Slot 2 signals.

Synchronous Serial Ports

Controller: 85230/8536

Number of Ports:	Two (IPMC761); one (IPMC712)
Configuration:	IPMC761: TTL to P2 (both ports), SIM
	configurable on MVME761;
	IPMC712: EIA-232 to P2
Baud Rate, bps max.:	2.5M sync, 38.4K async
Oscillator Clock Rate	10 MHz/5 MHz
(PCLK):

Asynchronous Serial Ports

Controller: 16C550 UART; 85230/8536

Number of Ports: Two (IPMC761); three (IPMC712)

Configuration: EIA-574 DTE (IPMC761);

EIA-232 (IPMC712)

Async Baud Rate, bps 38.4K EIA-232, 115Kbps raw max.:

Parallel Port:	HD-36, Centronics	D-36, Centronics com-
	compatible	patible
Ethernet:	10BaseT or	not available
	100BaseTX, RJ-45
SCSI:	8- or 16-bit, 50- or 68-	8-bit, standard SCSI D-
	pin connector via P2	50
	adapter

Board Size

Height: 233.4 mm (9.2 in.)

Depth: 80.0 mm (3.1 in.)

Front Panel Height: 261.8 mm (10.3 in.)

Front Panel Width: MVME761: 19.8 mm (0.8 in.)

MVME712M: 39.6 mm (1.6 in.)

A l l M o d u l e s

All Modules

Environmental

(Minimum of 400 LFM (linear feet per minute) of forced air cooling is recommended for operation in the higher temperature ranges.)

	Operating	Nonoperating
Temperature:	0° C to +55° C	–40° C to +85° C
	(inlet air temp. w/forced
	air cooling)
Humidity (NC):	5% to 90%	5% to 90%
Vibration:	2 Gs RMS,	6 Gs RMS,
	20–2000 Hz random	20–2000 Hz random