Motorola PCS Cellular Telephone specifications Storing and Placing Numbers with Pause Dialing

Storing and Placing Numbers with Pause Dialing

Entering a Pause in a Number

When you call automated systems, a recorded message prompts you for PIN numbers, Voice Mail numbers, etc.

You can store these numbers in your phone’s memory, separated by “pauses”—special characters that tell your phone to wait before sending additional numbers.

1Select Store Number.You will see Enter Number.

2Enter the phone number you use to access the automated system.

3Press Ä, then press ¾. You will see Insert Wait o.

4Press A to insert a pause (o) into the sequence.

5Enter the next group of numbers (such as an account number or PIN number.)

6Enter any other required symbols (such as * or #).

7Insert another pause, and enter the next group of numbers by repeating steps 3 through 5 as many times as necessary.

You can store up to 32 digits, including pauses. Then store the entire sequence as you would any phone number.

8Press Âto begin storing. You will see Location ——..

9Enter the two-digit memory location where you want the sequence stored.

You will see Alpha Or §.

10Enter a name for your sequence.

(See “How to Enter a Name” on page 22 for details on entering names.)

11Press A when you finish entering the name.

Your phone confirms your entry by displaying the location, number, and name you stored.

Placing a Call with Pauses

To use your stored sequence:

1Recall the stored number with the pause inserted.

2Press and hold A, or press ¾, to place the call.

3When the recording prompts you for information, press A or ¾ to send the next set of stored numbers.

4Press A or press ¾ as many times as necessary, to transmit all the numbers.

Using the Menu Features 31 English