Motorola PM400 Prioritize a CHANNEL/ Talkgroup in a Scan List, Set Priority Channels/Talkgroups

SCAN

PRIORITIZE A CHANNEL/ TALKGROUP IN A SCAN LIST

You may want to check the activity on one or two channels/talkgroups more frequently than others. You can do this by prioritizing them:

Priority	Scanning Sequence
Channel/
Talkgroup
None specified	Ch1➠Ch2➠Ch3➠
	Ch4➠…Ch1
Channel/	Ch2➠Ch1➠Ch2➠Ch3➠
Talkgroup 2	➠	➠	➠	…Ch1
(Priority 1)	Ch2 Ch4	Ch2
Channel/	Ch2➠Ch1➠Ch8➠Ch3➠
Talkgroup 2	➠	➠	➠	…Ch1
(Priority 1) and	Ch2 Ch4	Ch8
Channel/
Talkgroup 8
(Priority 2)

Note: If you are receiving on a non-priority channel/talkgroup and traffic becomes active on a priority channel/talkgroup, your radio will automatically switch to

38

that priority channel/talkgroup and indi- cate the activity with a short tone.

Set Priority Channels/Talkgroups

Note: You cannot have the same priority on two different channels/talkgroups.

1Dto enter menu mode.

2	Gor Huntil	PROG	LST
3	Dto select	PROG	LST
4	Gor Huntil	SCAN	LST
5	Dto select	SCAN	LST
6	Gor Huntil	EDIT	PRI
7	Dto select	EDIT	PRI
8	Gor Huntil	PRI	#1
	– or – until	PRI	#2

9Dto select the desired priority level.

You see the current priority channel/talkgroup.

English