Motorola QIP7100 OPERATION Turning Power On and Off, Changing Channels, Adjusting the Volume

2 OPERATION

Turning Power On and Off

Press POWER on the front panel or remote control to turn the QIP receiver on or off (standby). When using the remote control, be sure it is in set-top mode before pressing POWER.

Changing Channels

You can change channels in three ways:

•Press CHANNEL + or – on the front panel of the QIP receiver or the remote control to step through the channel selection.

•Enter the number of the channel you wish to view using the number keys on the remote control.

•Select the channel in the Interactive Program Guide.

Adjusting the Volume

Press VOLUME + or – on the remote control to adjust the volume. When you adjust the volume, the volume scale is displayed on the screen. Press MUTE on the remote control to toggle the sound on and off.

For best audio quality, use the remote control to set the QIP receiver to approximately three quarters of the maximum volume level and then adjust the audio levels on external devices such as your TV or A/V receiver.

Interactive Program Guide

The Interactive Program Guide displays information about TV programs and enables you to access features such as Parental Control or Pay-Per-View. Interactive program guides can vary with each service provider. Refer to the Interactive Program Guide’s instruction manual for detailed instructions.

M-Card™

The M-Card is required to view cable television programs or interactive on-demand programs. The M-Card should not be removed.

5