Motorola RSVP Numeric Display Pager for Micro-TAC Cell Phones manual Turning Your Pager on, Reset

TURNING YOUR PAGER ON

Press W to turn your pager on. Your pager will alert indicating that it is on.

The time of day and the “Alert Mode” indicator, silent[() or audible (D), is displayed.

READING MESSAGES

The RSVP pager can receive up to eight 20-character mes- sages. When a message is received, the pager alerts with an audible or a vibrate alert, and a flashing alert indication. Press any button to stop the alert. Display your message as follows:

1.Press the W button to display your message.

Messages that contain more than 12 characters are contin- ued on a second screen. The (B) indicator means a second screen exists.

2.Press W to advance to the second screen. If not selected, the second screen is automatically displayed after one minute.

The last screen of your message displays the message slot number and the time the message was received.

If a message is left unread, the pager emits a reminder alert every two minutes, and the number of unread messages is displayed.

3.The pager automatically returns to the main status display after approximately eight seconds.

TURNING ON THE BACKLIGHT

In low light conditions, press ● on the display backlight. Press ● again to turn off backlight or allow it to turn off auto- matically.

RESET

Pressing the ● button twice always resets the pager back to the main display menu.

6