Motorola SB3500 manual To cable

If you already have a TV connected to the cable outlet, you will need to use a 5-900 MHz splitter. Connect the coaxial cable as shown below:

SURFboard Model SB3500

Tested To Comply

With FCC Standards

FOR HOME OR OFFICE USE

I nput Voltage 48V 380mA

LINE 2 LINE 1 ENET POWER

CABLE

MODEL: SURFb oard SB3500

P /N: 473451-001

CUST S/ N: BCDFGHJKLMNP

S /N: P PP P MMY JJJ SS SSS CKA ABB CCCC

HFC MAC ID: A BCDEF012345

Made in Taiwan, R. O. C.

		To cable
	5-900
		outlet
To TV	MHz
	splitter

2 Connect the 10Base-T Ethernet cable to the SB3500 connector marked ENET and the other end to the Ethernet jack on the back of your computer.

3 Connect your telephone to the SB3500 connector marked LINE 1. A separate phone line can be connected to the SB3500 connector marked LINE 2.

Each line connector on the SB3500 supports up to five telephones (one REN per telephone).

4 Connect the power brick or UPS cable to the SB3500 connector marked POWER as shown in the following sections.

9