QUICK INSTALLATION GUIDE

11

A. Connect the SVG2500 to Your Cable TV System

You can connect your SVG2500 to your cable system either directly or using a splitter.

Connecting Directly to the Cable Outlet

1.Connect one end of the coaxial cable to the cable TV wall outlet and connect the other end to the cable connector on the SVG2500.

2.Connect one end of the DC powercord into the power connector on the SVG2500 and plug the other end into an AC wall outlet, surge protector, or UPS. This turns the SVG2500 on.

If, after a few minutes, the POWER, DS, US, and ONLINE lights on the front panel light solid green, continue with Section B, C, or D. Otherwise, contact your Internet service provider and provide your MAC address.