QUICK INSTALLATION GUIDE | 13 |
Connecting to the Cable Outlet Using a Splitter
Connecting an SVG2500 to the same cable outlet as a TV requires a 5 to 900 MHz splitter and two additional coaxial cables. If a coaxial cable is already connecting your TV to the cable wall outlet, disconnect it from the TV.
1.Connect one end of a coaxial cable to the cable TV wall outlet and connect the other end to the splitter input.
2.Connect one end of a secondcoaxial cable to the splitter output and connect the other end to your TV.
3.Connect one end of a third coaxial cable to the other splitter output and connect the other end to the cable connector on your SVG2500.
4.Connect one end of the DC powercord into the power connector on the SVG2500 and plug the other end into an AC wall outlet, surge protector, or UPS. This turns the SVG2500 on.
If, after a few minutes, the POWER, DS, US, and ONLINE lights on the front panel light solid green, continue with Section B, C, or D. Otherwise, contact your cable provider and provide your MAC address.