Motorola T340 manual Phone Phone Directory, N D Y, John

		• Press * to select the first character, then press
01.,	H
		+ to move to the next.
AAAAAAAA>
		• Repeat the above step until you have entered the
		entire name.

Note: If the name is less than eight characters long, you can use the rubout character (®) to fill the remaining slots with blanks. After entering the last character of the name, move to the next character and press * until the rubout character (®) displays. Press + until all remaining slots are filled with blanks.

Note: When selecting characters, the order in which they are displayed is A- Z, 0-9, a blank character, and then the rubout character followed by A again. If

DIRECTORY

DIRECTORY

0H

0000000000000>

•Press *to select the first digit, then press + to move to the next.

•Repeat the above step until you have entered the entire phone number.

Note: If the telephone number is less than 13

digits, advance to the rubout character (®) and press + to fill the remaining slots with blanks. Spaces cannot be entered in phone numbers.

•At the last digit press + to move to the Alert field.

you go past the character you want, press and hold * until the character displays again.

Adding a Received Message to the Phone Directory

When you receive a message that contains only a phone number, you can add that number to the phone directory.

Note: Any dashes, parentheses or spaces in the number are deleted before storing.

			• At the last character press + to move to the
	01.,	H
			Phone Number screen.
	W E N D Y	®>
￿			31
￿

While reading a message, press *until PHONE-DIR?displays and press + to enter it. The phone number of the message being read is automatically assigned the next available PHONE-DIR slot. The Name field is then displayed.

			• Press * to select the first character of the
	02 .,	H
			Name field, then press + to move to the next
	AAAAAAAA>
			field.
			• Repeat the above step until you have entered
￿			the entire name.
			• At the last character, press + to set and move
	02 .,	H
			to the Phone Number screen. Press	to
	JOHN	>
			select the desired Alert (0 - 9), or “-” for page
			blocking.	￿
			• Press ) to set and exit.
					33

PHONE

PHONE DIRECTORY

OPTIONAL FEATURESPHONE

	0	H		• Press	to select the desired Alert (0 - 9),
				or “-” for page blocking.
	6530828		>
				Note: The pager gives off a sample alert each
				time	is pressed. The page blocking feature
				prohibits pages from the entered numbers.
￿				• Press ) to set and exit.
				• When a message is received that matches a
	1	H	Q
				PHONE-DIR number, the associated PHONE-
	WENDY 6530828>			DIR name (WENDY) displays before it.

32

Deleting a Phone Directory Entry

PHONE-DIR entries are deleted when disabled. You may also edit an entry and
erase the characters using the rubout characters.
￿	From the Standby screen, press and￿￿release *until DIRECTORY? displays. Press
	+ to enter the DIRECTORY menu. Press + to enter PHONE-DIR mode.
			• Press * to select the PHONE-DIR entry you
	02 .,	H
			want to delete (e.g. 02 JOHN), then press + to
	JOHN	>
			move to the Enable/Disable field.
			• Press * to disable (//) this entry, then press
	02 //	H
			)to delete it and exit.
	JOHN	>

Optional Features

The Travel Clock, Travel Alarm and QuickNotes are optional features that may be available on your pager. If these features are not currently available and you would like to take advantage of them, contact your paging service provider.

Setting the Travel Clock

The Travel Clock (when activated) allows you to display an additional 24-hour clock in the upper left-hand portion of the display. This Travel Clock can also be

34