The UIM can be mounted in two different configurations:

directly on a flat spot within easy reach of the driver using the supplied mounting tape

using the supplied mounting bracket.

Caution: Do not mount in a location that obstructs driver’s vision or interferes with operation of the vehicle.

For optimal adhesion to the vehicle dashboard:

Ensure the adhesive and the dashboard surface are warm (temperature above 15º C). For better adhesion in cold conditions, ensure the vehicle interior and adhesive are heated for 30 minutes before applying the adhesive, and 30 minutes after applying the adhesive.

Prepare the dash surface with an appropriate adhesion promoter. Test the cleaner on a small, inconspicuous area of the mounting surface to ensure it does not result in blemishing. The surface must be completely dry before moving to the next step.

Position and install the mount with the supplied adhesive.

Optimal curing time at room temperature is 24 hours, and in cold conditions the adhesive needs 48 hours to properly cure.

Direct to flat surface

To install the UIM directly on a flat service:

Note: It is recommended to install the UIM directly on a flat surface as a curved surface can cause difficulties in pushing the buttons, and can cause the UIM to come loose.

Caution: The location of the UIM must not interfere with the vehicle's air bag deployment.

1Clean mounting surface thoroughly with an alcohol wipe (not supplied).

2Select UIM orientation (controls on left or right of display).

optimal for right-handed operation

optimal for left-handed operation

Note: To change screen display orientation, see “Set install preferences” on page 11.

6Installation

Page 8
Image 8
Motorola TK30, 68014301013 manual Select UIM orientation controls on left or right of display

TK30, 68014301013 specifications

The Motorola 68014301013, also known as the TK30, represents a remarkable piece of technology in the realm of computing microprocessors. This chip, launched during an era of rapid technological advancement in the 1980s, was instrumental in the development of powerful and efficient computing systems, redefining performance metrics in its time.

One of the key features of the TK30 is its compatibility with the Motorola 68000 architecture, which was renowned for its thorough instruction set and operational efficiency. The TK30 extends this legacy, providing enhanced processing capabilities and improved instructions for complex computations. This compatibility allowed software developed for earlier Motorola processors to run seamlessly on the TK30, giving it an edge in versatility.

The TK30 boasts a 32-bit data bus and a 24-bit address bus, facilitating access to a significantly larger memory space, which is crucial for running advanced applications and managing more substantial datasets. This expanded memory capability was particularly beneficial for developers looking to create sophisticated software solutions or for companies looking to improve their computing power without overhauling their existing systems.

Another remarkable characteristic of the TK30 is its support for multitasking. As the demands for processor efficiency grew, the TK30 was designed to handle multiple operations simultaneously, allowing for smoother and faster execution of applications. This multitasking capability made it a preferred choice for various operating systems, further broadening its appeal in the computing market.

Power management is also a critical aspect of the TK30’s design. The processor employs advanced power-saving features, which help in reducing overall energy consumption, making it a suitable option for embedded systems where power usage is a crucial concern. This focus on energy efficiency aligns with contemporary demands for sustainability and longevity in electronic products.

In summary, the Motorola 68014301013, or TK30, is not merely a microprocessor; it is a versatile, powerful technology that has stood the test of time. With its robust compatibility with legacy systems, impressive memory capabilities, multitasking support, and energy efficiency, the TK30 continues to be relevant in discussions of historical computing innovations, symbolizing an era where microprocessor technology began to pivot towards the complexities of modern computing. Its influence can still be felt as the foundations it laid helped shape the trajectory of future processor designs and computing technologies.