Motorola V260/V262 manual To Place Calls

To Place Calls

Advanced Voice Dialing lets you use voice commands to place a call:

•Use Name Dial to dial a Contacts entry by speaking the name of the entry.

•Use Digit Dial to dial any number by speaking the digits in the number.

Note: This feature recognizes only 7-digit, 10-digit, and 11-digit numbers. It will not dial 3-digit numbers such as

911.To make an emergency call, use the phone keypad to dial and send the number.

Action

1Press and release the voice button on the right side of the phone.

Your phone displays Say a command and plays the same prompt out loud.

2Say “Name Dial” or “Digit Dial.”

3When prompted, say the name of the Contacts entry or speak the digits in the phone number.

If the phone recognizes the name or number, it places the call.

If the phone asks you to repeat a name or number, say it again. If the name or number is not valid or not recognized, the phone does not place the call.

Phone Features

69