Release Tab

Charging the Battery

New batteries are shipped partially charged. Before you can use your phone, you need to install and charge the battery as described below. Some batteries perform best after several full charge/discharge cycles.

Action

1 Insert the travel charger plug into your phone

with the release tab facing up.

Be sure to insert the plug’s connector hooks

straight into the phone’s charger slots, so that both hooks engage to lock the plug in place.

Note: It may take up to 10 seconds for your phone to indicate that the battery is charging, depending on the battery charge level.

2Plug the other end of the travel charger into the appropriate electrical outlet.

3When your phone indicates Charge Complete, press the release tab and remove the travel charger.

Tip: You can safely leave the travel charger connected to the phone after charging is complete. This will not damage the battery.

Getting Started

13

Page 15
Image 15
Motorola V505 manual Charging the Battery, Action