
VIP1200 Series Installation Manual
7
CONNECTING TO AN HDTV – VIDEO ONLY
• Connect an RF coaxial cable to the cable wall outlet and the
TO WALL (VIDEO IN) connector on the TV receiver.
• If your HDTV has an HDMI input, connect an HDMI cable to the
HDMI connector. HDMI connection carries both video and audio
signals.
• If your HDTV has a DVI input, you can use an HDMI-to-DVI
converter to connect to the VIP1200 HDMI connector.
• If your HDTV has component video, connect component video
cables to the Y, Pb, and Pr connectors.
DVI and component video carry video signals only. To connect the audio,
refer to the following page. To connect to a home theater receiver, refer
to “Connecting to a Home Theater Receiver – Audio Only.”