Motorola Wireless Broadband Platform manual Step, Description of Task, Key/Number

		Table 1. The Authentication Process
	Step		Description of Task
1			When an SM attempts to enter the Canopy network
			it sends a registration request to the AP.
2			The AP then sends an authentication request to the
			BAM.
3			The BAM generates a 128 bit random number that is
			sent to the SM as a challenge.
4			The SM calculates a response using either its factory
			set key or the Authorization key it has been assigned
			by the network operator.
5			This challenge response is sent to the BAM through
			the AP.
6			The BAM compares the challenge response to what
			it calculated using the same random number and the
			Authentication key from the BAM SQL database.
7			If the results agree, the BAM sends the AP a
			message authenticating the SM and sends the SM
			and AP QoS information.
8			If the results do not agree or the SM is not in the
			database the BAM sends the AP a message denying
			authentication and the AP sends the SM a message
			to lock itself out from that AP for 15 minutes before
			retrying.

KEY MANAGEMENT

The Canopy system uses an ESN, two keys and a random number for authentication. Table 2 details the functionality of each of these along with the random number.

Table 2. Canopy Key Management

Key/Number	Description
Electronic Serial Number	Each Canopy SM has a factory set ESN that
	cannot be changed. The ESN is the identifier
	which is being authenticated and is 48 bits in
	length.
Authentication Key	This key is set by the network operator in the
(Authorization key or Skey)	BAM SQL database and by either the network
	operator or by the subscriber in the SM. This
	key can be seen in the BAM SQL database by
	the network operator; it can’t be displayed in
	the SM Configuration web page by
	subscriber. It is 128 bits in length.

4