Instructions for 30 Gallon Hanging Feeder
THANK YOU for your purchase of the Hanging Feeder, a top quality Moultrie product. Please read this sheet before operating this unit. If you should have any questions about this or any other Moultrie product, please contact us using the information at bottom of page.
To help us better serve you, please complete and mail the enclosed Warranty Card.
MOUNT YOUR FEEDER KIT TO DRUM
Using instructions provided with your Feeder Kit, mount your feeder and small funnel to the bottom of the Drum.
INSTALL OPTIONAL LARGE FUNNEL
If you will be using an optional 30 gallon internal funnel
INSTALL HANGING BRACKET
Insert steel rod with Coupler
Nuts in Drum. With Nuts and
Washers on outside of drum,
Tighten eye bolts into Coupler | Drum | |
Nuts. | ||
|
|
| Steel Rod with |
Eyebolt | Nut and | Coupler Nuts |
| ||
Washer |
| |
|
|
TIPS AND POINTERS
1:(Q) When should I fill the drum on my feeder? (A) To prevent damage to the feeder, do not load drum until unit is off the ground.
2:(Q) This is going to be heavy. How should I hang it? (A) A 30 gallon drum can hold up to 200 lbs. of feed; we suggest using block and tackle to raise to desired height, then secure as required.
3:(Q) What should I hang it with and how high should I hang it? (A) Some animals will chew through products like rope, so chain or steel cable is best. The bottom of the feeder should be about 7 feet from the ground.
Our Service Department will gladly answer any questions you have.
Call
www.moultriefeeders.com
061604R10 /