Switching and Address Learning
Moxa EtherDevice Switch has an address table that can hold up to 1K node addresses, which makes it suitable for use with large networks. The address tables are self-learning, so that as nodes are added or removed, or moved from one segment to another, Moxa EtherDevice Switch automatically keeps up with new node locations. An address-aging algorithm causes the least-used addresses to be deleted in favor of newer, more frequently used addresses. To reset the address buffer, power down the unit and then power it back up.
Auto-Negotiation and Speed Sensing
All of Moxa EtherDevice Switch’s RJ45 Ethernet ports independently support auto-negotiation for speeds in the 10BaseT and 100BaseTX modes, with operation according to the IEEE 802.3u standard. This means that some nodes could be operating at 10 Mbps, while at the same time, other nodes are operating at 100 Mbps.
Auto-negotiation takes place when an RJ45 cable connection is made, and then each time a LINK is enabled. Moxa EtherDevice Switch advertises its capability for using either 10 Mbps or 100 Mbps transmission speeds, with the device at the other end of the cable expected to similarly advertise. Depending on what type of device is connected, this will result in agreement to operate at a speed of either 10 Mbps or 100 Mbps.
If a Moxa EtherDevice Switch RJ45 Ethernet port is connected to a non-negotiating device, it will default to 10 Mbps speed and half-duplex mode, as required by the IEEE 802.3u standard.
Specifications
Technology | |
Standards | IEEE802.3, 802.3u, 802.3x |
Processing Type | Store and Forward, with IEEE802.3x full duplex, |
| non-blocking flow control |
Address Table Size | 1K uni-cast addresses |
Interface | |
RJ45 Ports | 10/100BaseT(X) auto negotiation speed, F/H |
| duplex mode, and auto MDI/MDI-X connection |
LED Indicators | Power, 10/100 M |
Power | |
Input Voltage | DC: 12 to 48 V, AC: 18 to 30V, 47~63 Hz |
Power Consumption | 5W |
Connection | Removable 3-contact Terminal Block |
Overload Current | 0.12A |
Protection | |
Reverse Polarity | Present |
Protection | |
Mechanical | |
Casing | IP30 protection, plastic case |
Dimensions | 25 x 109 x 88 mm (W x H x D) |
Weight | 135g |
Installation | DIN-Rail |
Environment | |
Operating Temperature | -10 to 60°C (14 to 140°C) |
Storage Temperature | -40 to 70°C (-40 to 158°) |
Ambient Relative | 5 to 95% (non-condensing) |
Humidity | |
