JVC RX-6020VBK manual Specifications, English, W per channel, min. RMS, driven into 8 Ω, Amplifier

Specifications		Designs & specifications are subject to change without notice.
Amplifier
Output Power
	At Stereo operation:
	Front channels:	100 W per channel, min. RMS, driven into 8 Ω,
		40 Hz to 20 kHz with no more than 0.8% total
		harmonic distortion.
	At Surround operation:
	Front channels:	100 W per channel, min. RMS, driven into 8 Ω at 1 kHz with no
		more than 0.8% total harmonic distortion.
	Center channel:	100 W, min. RMS, driven into 8 Ω at 1 kHz, with no more than
		0.8% total harmonic distortion.
	Rear channels:	100 W per channel, min. RMS, driven into 8 Ω at 1 kHz, with no
		more than 0.8% total harmonic distortion.
Audio
Audio Input Sensitivity/Impedance (1 kHz):	DVD, VCR, TV SOUND, CD, TAPE/CDR:
			220 mV/47 k Ω
Audio Input (DIGITAL IN)* :	Coaxial: DIGITAL 1 (DVD):		0.5 V (p-p)/75 Ω
	Optical: DIGITAL 2 (CD):		–21 dBm to –15 dBm (660 nm ±30 nm)

*Corresponds to Linear PCM, Dolby Digital, and DTS Digital Surround (with sampling frequency — 32 kHz, 44.1 kHz, 48 kHz).

Audio Output Level:	TAPE/CDR, VCR:	220 mV
Signal-to-Noise Ratio (’66 IHF/’78 IHF):	DVD, VCR, TV SOUND, CD, TAPE/CDR:
		87 dB/78 dB
Frequency Response (8 Ω):	DVD, VCR, TV SOUND, CD, TAPE/CDR:
		20 Hz to 20 kHz (±1 dB)
Tone Control:	Bass (100 Hz):	±10 dB
	Treble (10 kHz):	±10 dB

Video

Video Input Sensitivity/Impedance:		1 V (p-p)/75 Ω
Composite video:	VCR, DVD:
Video Output Level/Impedance:
Composite video:	VCR, MONITOR OUT:	1 V (p-p)/75 Ω
Synchronization:	Negative
Signal-to-Noise Ratio:	45 dB

English

31