JVC RX-6020VBK manual Connecting the Power Cord, English, Digital connections

DVD player

A DVD player B

DVD

IMPORTANT:

•	When connecting the DVD player or digital TV to the digital terminal,
	you also need to connect it to the video jack on the rear. Without
	connecting it to the video jack, you cannot view any playback
	picture.
•	After connecting the components to the DIGITAL IN terminals, make
	sure the following if necessary:
	– Set the digital input terminal setting correctly. For details, see
	“Setting the Digital Input (DIGITAL IN) Terminals” on page 11.

English

AUDIO

RIGHT	LEFT
FRONT
	DVD
SUB	CENTER
WOOFER
REAR
RIGHT	LEFT

SUBWOOFER

OUT

MONITOR

OUT

DVD

OUT

(REC)

VCR

IN

(PLAY)

VIDEO

– Select the digital input mode correctly. For details, see “Selecting

the Analog or Digital Input Mode” on page 11.

Digital TV

DVD player

DVD

CD player CD recorder

ÅTo front left/right channel audio output (or to audio mixed

output)

ıTo video output

Note:

To enjoy the software encoded with Dolby Digital or DTS Digital Surround, you must connect the DVD player using the digital terminal on the rear of this receiver. (See “Digital connections” below.)

When the component has a digital coaxial output terminal, connect it to the DIGITAL 1 (DVD) terminal, with the digital coaxial cable (not supplied).

DIGITAL 1 (DVD)

For enjoying DVD MULTI Playback Mode—

•When you connect the DVD player with its analog discrete output

(5.1 CH reproduction) jacks:

B A DVD player

DVD

C E

D

When the component has a digital optical output terminal, connect it to the DIGITAL 2 (CD) terminal, with the digital optical cable (not supplied).

Before connecting a digital optical cable, unplug the protective plug.

Notes:

DIGITAL 2 ( CD )

DIGITAL IN

AUDIO

RIGHT LEFT

FRONT

DVD

SUB CENTER WOOFER

REAR

RIGHTLEFT

SUBWOOFER

OUT

MONITOR

OUT

DVD

OUT

(REC)

VCR

IN

(PLAY)

VIDEO

•When shipped from the factory, the DIGITAL IN terminals have been set for use with the following components:

–DIGITAL 1 (coaxial): For DVD player

–DIGITAL 2 (optical): For CD player

•When you want to operate the CD player or CD recorder using the COMPU LINK remote control system, connect the target component also as described in “Analog connections” (see page 6).

Connecting the Power Cord

Before plugging the power cord into an AC outlet, make sure that all

ÅTo rear left/right channel audio output ı To center channel audio output

Ç To subwoofer audio output

Î To front left/right channel audio output ‰ To video output

Digital connections

This receiver is equipped with two DIGITAL IN terminals—one digital coaxial terminal and one digital optical terminal.

You can connect any component to one of the digital terminals using a digital coaxial cable (not supplied) or digital optical cable (not supplied).

connections have been made.

Plug the power cord into an AC outlet.

CAUTIONS:

•Do not touch the power cord with wet hands.

•Do not pull on the power cord to unplug the cord. When unplugging the cord, always grasp the plug so as not to damage the cord.

7