Mr. Coffee ES11, ESX10 Setting Clock and Timer, Setting the Clock, Presetting the Brewing Time

Models: ESS10 ES10 ESX30 ES11 ESX11 ESX33 ESS11 ESX10

1 36
Download 36 pages 42.07 Kb
Page 12
Image 12
Setting Clock and Timer

Important: Resetting Delay Brew at the Pre-Set Time

Due to a safety feature included in this unit, the programmable timer will not automatically brew the next day after its last use. If the Delay Indicator Light in the lower left hand corner of the clock display is not illuminated, then you will need to reset the DELAY BREW feature by pressing the DELAY BREW button.

The programmable timer will not automatically brew the next day if left in the AUTO position after its last use. This is a safety feature. If the OFF indicator light in the lower right hand corner of the clock display is illuminated, reset AUTO BREW by turning the control switch to OFF, then to AUTO. (Models ESX20, ESX23, ESX20D, ESX23D Only)

Setting Clock and Timer

(Programmable Models Only)

Note: You do not have to set your clock before the Coffeemaker will operate. Plug in the power cord, press SELECT once to turn the Coffeemaker on. The ON light will illuminate and the clock will stop flashing, but it will not keep time.

Setting the Clock

1.Plug the power cord into your electrical outlet. The clock display will flash until you set the time.

2.Alternately press and hold the HOUR and MINUTE buttons until you reach the current time.

3.The PM indicator light in the display will illuminate to indicate PM time.

Presetting the Brewing Time

1.You must first set the clock to the correct time before setting the desired time for Delay Brew.

2.Press the SET/DELAY button, then alternately press the HOUR and MINUTE buttons to set the time you want the Coffeemaker to start brewing.

The Delay Indicator Light will flash during this time.

3.Press the SET/DELAY button again to turn off the flashing light. If the

Delay Indicator Light is not flashing, pressing the HOUR or MINUTE buttons will change the clock time.

Brewing Automatically at the Preset Time

1.Follow Steps 1 – 5 in the “Brewing” Section.

2.Press the SELECT button. The Delay Indicator Light should illuminate.

3.Brewing will begin at the preset time. The coffee will remain hot in

the decanter for 2 hours. To keep your coffee hot for an additional 2 hours, press the SELECT button. The ON indicator light should illuminate.

12

Page 12
Image 12
Mr. Coffee ES11, ESX10, ESS11, ESX33, ESX11, ESX30 Setting Clock and Timer, Setting the Clock, Presetting the Brewing Time