Mr. Coffee NLS12 instruction manual Operation and US E, Before First USE, Setting the Clock

OPERATION AND US E

BEFORE FIRST USE

Before using your Coffeemaker for the first time, wash decanter/lid and removable brew basket (black) using a mild, non-abrasive detergent and water. Rinse each thoroughly. Follow Steps 4 – 6 (Brewing Coffee) using water, to clean the inside.

PM		CLOCK DISPLAY		OFF
HOUR	MINUTE	AUTO/OFF	INDICATOR	BREW
SET	SET	ON SWITCH	LIGHT	BUTTON

SETTING CLOCK AND TIMER

(NLX20, NLX20D, NLX23, NLX23D)

NOTE: You do not have to set your clock before the Coffeemaker will operate. Plug in the power cord, slide the control lever to the “on” position. The green light will illuminate.

SETTING THE CLOCK

1.Turn the AUTO/OFF/ON switch to “OFF.”

2.Plug the power cord into your electrical outlet. The clock display will flash until you set the time.

3.Alternately press and hold the “HOUR” and “MINUTE” buttons until you reach the current time. The “PM” indicator light in the display will illuminate to indicate PM time.

PRESETTING THE BREWING TIME

1.Press and hold the “BREW” button while setting the desired brew time with the “HOUR” and “MINUTE” buttons. The “PM” indicator light in the display will illuminate to indicate PM time.

BREWING AUTOMATICALLY AT THE PRESET TIME

1.Follow Steps 1 – 5 in the “BREWING” Section.

2.Press the PRESS/HOLD button. The “AUTO” indicator light should illuminate.

3.Brewing will begin at the preset time. The coffee will remain hot in

the decanter for 2 hours. To keep your coffee hot for an additional 2 hours, press the “SELECT” button. The “ON” indicator light should illuminate.

5