BREWING 1 – 4 CUPS (Models NLX30, NLX33 Only)
If you want to brew 4 cups or less, the 1 – 4 Cup mode will slow the brewing cycle to ensure optimal saturation of the ground coffee beans. NOTE: Use only the proper amount of ground coffee and fill the water reservoir with 4 cups or less of water.
1.Press the SELECT button twice.
2.The ON and 1 – 4 Cup Indicator Lights should be illuminated.
If you want to brew 4 cups or less at a preset time, follow Steps 1 – 3 in the “Presetting Your Brewer” section.
1.Press the SELECT button twice.
2.The ON and 1 – 4 Cup Indicator Lights should be illuminated.
ADJUSTING THE WARMER PLATE TEMPERATURE (Models NLX30, NLX33 Only)
After the coffee is brewed, you can keep the coffee at your preferred temperature. Turn the Warmer Temp knob clockwise to increase the temperature, or turn counterclockwise to decrease the temperature. To maintain a constant temperature, you may need to lower the warmer plate temperature as you decrease the amount of coffee in the pot. DO NOT allow the decanter to boil dry. This will damage the decanter.
AUDIBLE INDICATORS (Models NLX30, NLX33 Only)
When the Coffeemaker is finished brewing and your coffee is ready, your Coffeemaker will beep five times.
Just before the Coffeemaker shuts off automatically, it will beep three times. Upon completion of the clean cycle, the Coffeemaker will beep once.
CLEANING
Your Coffeemaker must be cleaned when you begin to notice excessive steaming or the brewing time increases considerably. This condition is caused by a
The frequency of cleaning depends on the hardness of water used. The following table gives a suggested cleaning schedule.
SUGGESTED CLEANING INTERVAL
Type of Water | Cleaning Frequency |
Soft Water | Every 80 Brew Cycles |
Hard Water | Every 40 Brew Cycles |
Your Coffeemaker may be cleaned by using MR. COFFEE® Cleaner or vinegar. MR. COFFEE Cleaner is available at many retail stores or by calling the
MR. COFFEE Consumer Affairs Department at
9
