2.Empty contents of one packet of MR. COFFEE CLEANER into the decanter and stir until the cleaner is completely dissolved. This will make a clear blue solution.

3.Pour the blue solution into the coffeemaker.

4.Place the empty decanter on the warming plate and slide the brew funnel into place.

CAUTION: The special PAUSE ‘n SERVE decanter lid’ must be on the decanter at all times. This lid controls the flow of liquids into the decanter. If it is not in place, the cleaning solution will overflow in the brew funnel onto the warming plate.

5.Turn your coffeemaker on.

6.When the blue solution has stopped flowing, turn your coffeemaker off.

7.Discard the blue solution and thoroughly rinse the decanter and brew funnel.

8.Repeat steps l-7 with clean water only (no blue solution).

9.Continue to rinse out the unit until you see no trace of the blue solution.

10.If a normal brewing flow rate is not achieved, repeat the cleaning steps 1-9.

Using vinegar:

1.Pour 1 quart of undiluted white household vinegar into your coffeemaker.

2.Put a paper filter into the brew funnel. Slide the brew funnel back into place and place the empty decanter on the warming plate .

CAUTION: The special PAUSE ‘n SERVE decanter lid must be on the decanter at all times. This lid controls the flow of liquids into the decanter. If it is not in place, the cleaning solution will overflow in the brew funnel onto the warming plate.

3.Turn the coffeemaker on. Watch the cup markings as the vinegar flows into the decanter. When three cups have flowed through, turn the coffeemaker off, and let stand for l/2 hour.

4.After l/2 hour, pour the 3 cups of vinegar back into the coffeemaker.

5.Place the empty decanter on the warming plate. Turn the coffeemaker on and let all of the vinegar flow through.

6.Turn the coffeemaker off and discard the vinegar and the paper filter.

Page 10
Image 10
Mr. Coffee SRX20 manual Using vinegar