Mr. Coffee SRX20 manual Important, Please Read Before First Use, Setting the Clock and Timer

Important, Please Read Before First Use

. THE CLOCK ON THIS MODEL MUST BE SET FIRST, BEFORE THE COFFEEMAKER WILL OPERATE.

Please refer to setting the clock instructions, below.

. THE SPECIAL PAUSE ‘N SERVE DECANTER LID MUST BE PROPERLY IN PLACE ON THE DECANTER AT ALL TIMES.

This lid opens and closes the drip-stop valve on the bottom of the brewing funnel. If this lid is not in place on the decanter when brewing coffee, coffee will build up in the brewing funnel and begin to overflow onto the warming plate.

. AUTOMATIC PAUSE ‘N SERVE ALLOWS YOU TO REMOVE THE DECANTER FOR NO LONGER THAN ONE MINUTE to sneak a cup while the coffee is still brewing. If the decanter is removed for more than one minute, the brewing funnel will overflow.

Be sure any replacement decanter you purchase is a Mr. Coffee decanter with the Pause ‘n Serve lid.

Setting the Clock and Timer

								AUTO OFF LIGHT
PM INDICATOR		+						indicates machine shut
								itself off or Auto brew
				‘“‘,:;,FQ. 3
HOUR SET			8			#D d’		needs to be reset
advances clock							5	BREW SET
-2~
by the hour				wq				sets time to brew
	y-0 w.
SIGNAL LIGHT				‘--$.$: ’				MINUTE SET
					t
indicates when		c						advances clock
coffeemaker is on					3			by the minute

CONTROL SWITCH

ON - OFF - AUTOMATIC

TO SET CLOCK...

1.Move the CONTROL SWITCH to OFF.

2.Plug the power cord into your electrical outlet. The display on the clock will flash until you set the time.

3.Alternately press and hold the HOUR and MINUTE buttons until you reach the current time. A red dot will appear in the upper left display corner for PM time.

TO PRESET THE BREWING TIME...

Simply press and hold the BREW SET button while setting the brew time with the HOUR and MINUTE buttons. Please pay attention to PM INDICATOR light.

5