Mr. Coffee URT84, Urt85, UNT83 user manual Brewing Coffee, Cleaning the Coffeemaker Before First Use

Brewing Coffee

Cleaning the Coffeemaker Before First Use

Follow the steps under “Adding Water and Ground Coffee” and “Brewing Coffee Now,” (Pages 8-9) but do not add ground coffee.

Selecting and Measuring Ground Coffee

For best results, use coffee ground for use with automatic drip coffeemakers. The amounts shown below are suggested amounts.

To Brew		Use This Amount of Ground Coffee
8	cups	7 tablespoons or 3-1/2 scoops
6	cups	6 tablespoons or 3 scoops
4	cups	5 tablespoons or 2-1/2 scoops
2	cups	3 tablespoons or 1-1/2 scoops

• two level tablespoons = one level scoop

• one cup = five ounces brewed coffee

Adding Water and Ground Coffee

1) Open the brew basket lid and lift out the removable filter insert.

Make sure to remove the cardboard insert before first-time use.

2) Place a MR. COFFEE® brand 8-12 cup paper filter or a MR. COFFEE® permanent gold-tone filter in the removable

filter insert.

3) Add the desired amount of ground coffee to the filter. Gently shake the filter insert to level the ground coffee.

4)Return the filter insert to the brew basket. Be certain that the filter is centered in the

filter insert. Close the lid to the brew basket.

Do not brew coffee while the brew basket lid is open.

5)For Model UNT83: Open the reservoir lid and fill the reservoir with cold water for the desired

cup level on the water window (up to 8 cups).

For Models UNT83, URT84, URT85, URT84, URT85,

URTX83, URTX84 and URTX85 only: Remove the

water reservoir by grasping the hand holds in the back of the reservoir, and pulling up. Fill it with the desired amount of cold water. Replace the reservoir on the Coffeemaker, making sure that it is firmly attached to the Coffeemaker body.

Make sure the reservoir is squarely centered on the Coffeemaker or the water may overflow. An overflow may cause personal injury or damage to property.

Do not remove the water reservoir at any time during the brewing cycle.

6)Place the empty thermal carafe on the base.

To achieve the best performance, rinse the thermal carafe with warm water. This will improve the heat retaining capabilities of the thermal carafe. While brewing, the Brew-Thru lid must be on the thermal carafe and the POUR arrow of the lid must be aligned with the spout. Otherwise, the carafe may overflow.

Make sure the thermal carafe is squarely centered on the base or the water and grounds will overflow from the brew basket. An overflow may cause personal injury or damage to property.

To reduce the risk of damaging the thermal carafe and/or the risk of personal injury, do not add cold water to the thermal carafe if the thermal carafe is already hot.

Brewing Coffee Now

For Models UNT83, URT84, URT85, URTX83, URTX84 and URTX85 only:

Press the BREW NOW button

The ON indicator will illuminate, indicating that the Coffeemaker is on and the brew cycle will begin. When the coffee stops flowing, the brew cycle is complete.

The Coffeemaker will turn off automatically. The indicator light will go out to let you know the brew cycle is complete.

8 9