Mr. Coffee UR13, URX30, URX33, URX20, URX23, UR12 user manual Adjusting the warming plate temperature

Models: UR13 UR12 URX23 URX20 URX33 URX30

1 16
Download 16 pages 331 b
Page 11
Image 11
Adjusting the warming plate temperature

3.) While still pressing and holding the PRESS HOLD button, press and hold the Min. button until the clock displays the correct minute.

4.) Release the PRESS HOLD button.

5 ) Press the DELAY BREW button.

The Delay Brew indicator will light. The delay timer is set and the coffeemaker will begin brewing the coffee at the time you selected.

If You want Your coffee t o brew at the same time z; the folIowIng day, simply add the desired amount

of ground coffee, fill the water reservoir and press the DELAY BREW button

Adjusting the warming plate temperature

(models URX30 and URX33 only)

You can adjust the warming plate temperature to five different settings, from warm to very hot.

To adjust the warming plate temperature:

Press the Min. button to lower the temperature of the warming plate. Press the Max. button to raise the temperature of the warming plate.

Cleaning the coffeemaker between brew cycles

To clean up the used coffee grounds and filter:

I .) Discard the grounds and paper filter and rinse the filter basket. You may also wash the filter basket in the dishwasher (top rack dishwasher safe only).

2 ,) Rinse the decanter with warm water. You may also wash the decanter in tie dishwasher (top rack dishwasher safe only).

AI Make sure the coffeemaker is turned off when the decanter is empty.

Brewed coffee and grounds are both very hot.

Handle them with care to avoid scalding injuries.

Unplug the coffeemaker’s power cord if you are not using the coffeemaker or clock.

C7

Page 11
Image 11
Mr. Coffee UR13, URX30, URX33, URX20 Adjusting the warming plate temperature, Cleaning the coffeemaker between brew cycles