51Remove the water reservoir by gasping the hand holds in the back of the reservoir, and pulling up. Fill it with the desired amount of tap water. Replace the reservoir on the coffeemaker, making sure that it is firmly attached to the coffeemaker body
Make sure the reservoir is squarely centered A on the coffeemaker or the water may overflow.
An overflow may cause personal injury or damage to property.
Use the water window marks to measure the water, s; not the decanter marks The decanter marks
measure brewed coffee only
6.) Place the decanter on the warming plate.
Make sure the decanter is squarely centered
Aon the warming plate or the water and grounds will overflow from the brew basket. An overflow may cause personal injury or damage to property.
To reduce the risk of damaging the decanter and/or the risk of personal injury, do not add cold water to the decanter if the decanter is already hot. Allow the decanter to. cool before using .
Do not brew coffee while the brew basket lid is open.
Brewing coffee now
For models URI 2 and URI 3:
Press the ON button.
The ON indicator will light, indicating that the coffeemaker is on and the brew cycle will begin. When the coffee stops flowing, the brew cycle is complete.
While the coffee i s brewing, the Pause N’ Serve
z> feature allows you to sneak a cup of coffee from the decanter. REPLACE THE DECANTER ON THE WARMING PLATE WITHIN 30 SECONDS TO PREVENT OVERFLOW AND POSSIBLE INJURY
To turn off the coffeemaker, press the OFF button.
If the brew basket overflows or fails to empty A.mto the decanter, do not open the brew
basket. Unplug the coffeemaker and wait for the contents to cool before handling.
