Mr. Heater SRPH02S Step, NOTE Assembly of this heater requires, Connect Gas Line to Cylinder

NOTE: Assembly of this heater requires

basic mechanical skills. Proper assembly

is the responsibility of the installer.

Step 7 ---- Connect Gas Line to Cylinder

Attach Gas hose to regulator with 3/8 inch open end wrench and adjustable wrench.

Attach regulator to cylinder. Tighten securely. Move cylinder to the plate of base assembly.

Step 8 ---- Check for leaks

Your Patio Heater has been checked at all factory connections for leaks. To check the connection of the gas hose/regulator/cylinder:

1)Make leak solution by mixing 1 part liquid dish soap and 3 parts water.

2)Brush several drops (or use spray bottle)

of the solution onto the gas hose/regulator and regulator/cylinder connection.

3)Turn on gas. Inspect the connections and look for bubbles.

4)If no bubbles appear, the connection is safe.

5)If bubbles appear, there is a leak, loosen and re-tighten this connection.

ASSEMBLY

Step 7

Step 8

9