MRV Communications AE182FCAHA, AE092FCAHA manual Sleep function, Operation Mode

Operating instructions

SLEEP function

Using SLEEP function

Before using this function, the time must be checked and set. After the unit starts, set the operation status, then press "SLEEP" key.

AM

R

AUTO

LOW MIN HIGH

SETTEMP

Before going to bed, you can press the "SLEEP" key on the remote controller and the air condit- ioner will operate in comfortable SLEEP mode and bring you a sound sleep.

Operation Mode

In COOL/DRY mode

1 hour after SLEEP mode starts, temp. will become 1*higher than temp. setting. After another 1 hour, temp. rises by 1* further. The unit will continue to run for further 6 hours and then automatically stops. The controlled temperature is higher than temperature setting so that room temperature wont be too low for your sleep.

In HEAT mode

(unavailable for cool only models)

1 hour after SLEEP mode starts, temp. will become 2*lower than temp. setting. After another 1 hour, temp. decreases by 1* further. This temperature will be maintained for 3 hours before rising by 1*. The unit will continue to run for further 3 hours and then stops automatically. The controlled temperature is lower than temperature setting so that room temperature wont be too high for your sleep.

In AUTO mode

The unit operates in corresponding SLEEP mode adapted to the automatically selected operation mode.

TIMER	CLOCK		SWING
	TIME	SLEEP	TEMP
SET			FAN	MODE
			SPEED

Sleep operation starts Sleep operation stops

	About 6 hr	Sleep tem-
1 hr	Rise by 1*	perature
1hr	Rise by 1*
Temperature		Unit stops
setting

In COOL/DRY mode

Temperature			Unit stops
setting
1hr	Decrease by 2*
	1 hr		About
	Decrease by 2*			Sleep tem-
			3 hr
				perature
	3 hr		Rise by1*
Sleep operation starts		Sleep operation stops
	In HEAT mode

In FAN mode

SLEEP function is not available.

1 2