AMD RAID

6� The message will show up on the bottom, press any key to use maximum capacity or press [Ctrl-Y] to modify array capacity manually.

Important

•The default capacity is the full capacity of the selected hard drives.

•If you allocate the first LD capacity manually, you can create second LD with remain- ing capacity of the selected hard drives.

� The LD creation is done, the screen shows the LD information as below.Press ESC key to the main screen.

� Press ESC key to exit the utility, a message “System is going to REBOOT! Are You Sure?” will display, answer “Y” to exit it and the system will reboot.