MS-7265 Mainboard

SuperIO Device

Press <Enter> and the following sub-menu appears:

Onboard FDC Controller

Select [Enabled] if your system has a floppy disk controller (FDD) in- stalled on the system board and you wish to use it. If you install add-on FDC or the system has no floppy drive, select [Disabled] in this field.

Onboard Serial Port 1/2

These items specify the base I/O port addresses of the onboard Serial Port 1/ Serial Port 2. Selecting [Auto] allows AMIBIOS to automatically determine the correct base I/O port address. Settings: [3F8/IRQ4], [2F8/ IRQ3], [3E8/IRQ4], [2E8/IRQ3] and [Disabled].

Watch Dog Timer

You can enable the system watch-dog timer, a hardware timer that generates either an NMI or a reset when the software that it monitors does not respond as expected each time the watch dog polls it (select the time period in a separate field). See the WDT fields, below.

3-14

Page 48
Image 48
MSI FUZZY 945GM1 manual MS-7265 Mainboard SuperIO Device, Onboard FDC Controller, Onboard Serial Port 1/2, Watch Dog Timer