MS-7597

AMD Cool’n’Quiet

The Cool’n’Quiet technology can effectively and dynamically lower CPU speed and power consumption.

Important

To ensure that Cool’n’Quiet function is acti- vated and will be working properly, it is re- quired to double confirm that:

*Run BIOS Setup, and select Cell Menu. Under Cell Menu, find AMD Cool’n’Quiet, and set this item to “Enabled”.

*Enter Windows, and select [Start]->[Set- tings]->[Control Panel]->[Power Options]. Enter Power Options Properties tag, and select Minimal Power Management under Power schemes.

Adjust CPU FSB Frequency (MHz)

This item allows you to adjust the CPU FSB frequency.

Adjust CPU Ratio

This item is used to adjust CPU clock multiplier (ratio). It is available only when the processor supports this function.

Adjusted CPU Frequency (MHz)

It shows the adjusted CPU frequency (FSB x Ratio). Read-only.

Memory-Z

Press <Enter> to enter the sub-menu.

DIMM1~2 Memory SPD Information

Press <Enter> to enter the sub-menu. This sub-menu displays the information of installed memory.

Advance DRAM Configuration

Press <Enter> to enter the sub-menu.

DRAM Timing Mode

This field has the capacity to automatically detect the DRAM timing. If you set this field to [DCT 0], [DCT 1] or [Both], some fields will appear and selectable. DCT 0 controls channel A and DCT1 controls channel B.

1T/2T Memory Timing

When the DRAM Timing Mode is set to [Manual], the field is adjustable. This field controls the command rate. Selecting [1T] makes DRAM signal controller to run at 1 clock cycle rate. Selecting [2T] makes DRAM signal controller run at 2 clock cycles rate.

23

Page 23
Image 23
MSI GF615M-P33 manual