MS-7125 M-ATX Mainboard

CPU Installation Procedures for Socket 939

1.Please turn off the power and unplug the power cord before installing the CPU.

 

Open Lever

Sliding

90 degree

Plate

 

2.Pull the lever sideways away from the socket. Make sure to raise the lever up to a 90-de- gree angle.

3.Look for the gold arrow on the CPU. The gold arrow should point as shown in the picture. The CPU can only fit in the correct orientation.

4.If the CPU is correctly installed, the pins should be completely embedded into the socket and can not be seen. Please note that any violation of the correct installation procedures may cause permanent damages to your mainboard.

5.Press the CPU down firmly into the socket and close the lever. As the CPU is likely to move while the lever is being closed, al- ways close the lever with your fingers pressing tightly on top of the CPU to make sure the CPU is properly and completely embed- ded into the socket.

Gold arrow

Correct CPU placement

Gold arrow

O

 

Gold arrow

E-2-4