Intel
RAID
10� Leave the disk in the floppy drive until the system reboots itself. Windows setup will need to copy the files from the floppy again after the RAID volume is formatted, and Windows setup starts copying files.
■ Existing Windows Driver Installation
1� Insert the MSI Driver Disc into the optical drive. 2� The setup screen will automatically appear.
3� Under the Driver tab, click on Intel RAID Drivers. 4� The drivers will be automatically installed.
■ Confirming Windows Driver Installation
1� From Windows, open the Control Panel from My Computer followed by the System icon.
2� Choose the Hardware tab, then click the Device Manager tab.
3� Click the “+” in front of the SCSI and RAID Controllers hardware type. The driver Intel(R) SATA RAID Controller should appear.
10
