MSI X79A-GD45 manual Using Intel RSTe Option ROM, English

Using Intel RSTe Option ROM

The RSTe (Intel Rapid Storage Technology enterprise) Option ROM should be inte� grated with the system BIOS on all mainboards with a supported Intel chipset. The Intel RSTeOption ROM is the Intel RAID implementation and provides BIOS and DOS disk services. Please use <Ctrl> + <I> keys to enter the “Intel® RAID for Serial ATA” status screen, which should appear early in system boot-up, during the POST (Power-On Self Test). Also, you need to enable the RAID function in BIOS to create, delete and reset RAID volumes.

Creating, Deleting and Resetting RAID Volumes:

The Serial ATA RAID volume may be configured using the RAID Configuration utility stored within the Intel RAID Option ROM. During the Power-On Self Test (POST), the following message will appear for a few seconds.

Important

The “Device Model”, “Serial #” and “Size” in the following example might be different from your system.

RAID Volumes

None defined.

Physical Disks:
Port	Device Model	Serial #	Size	Type/Status(Vol ID)
1	XXXXXXXXXXXXX	XXXXXXXXXXXXX	XXX.XGB	Non-RAID Disk
2	XXXXXXXXXXXXX	XXXXXXXXXXXXX	XXX.XGB	Non-RAID Disk
Press	<CTRL-I> to enter Configuration Utility..

After the above message shows, press <Ctrl> and <I> keys simultaneously to enter the Intel Rapid Storage Technology enterprise Option ROM.

Important

The following procedure is only available with a newly-built system or if you are reinstall� ing your OS. It should not be used to migrate an existing system to RAID.

English