SECTION 3: ASSEMBLING YOUR LAWN MOWER

IMPORTANT: This unit is shipped without gasoline or oil in the engine. Be certain to service engine with gasoline and oil as instructed in the separate engine manual before operating your mower.

NOTE: Reference to right or left hand side of the mower is observed from the operating position.

Removing Unit From Carton

•Remove staples, break glue on top flaps, or cut tape at carton end and peel along top flap to open carton.

•Remove loose parts if included with unit (i.e., operator’s manual, etc.)

•Cut along corners, lay carton down flat, and remove packing material.

•Roll or slide unit out of carton and check carton thoroughly for loose parts.

Loose Parts in Carton

•Grass Bag

•Side Discharge Chute

•Rear Wheels

•Hardware Pack

Disconnecting Spark Plug Wire

Before setting up your lawn mower, disconnect the spark plug wire from the spark plug and ground against the engine. See Figure 1.

Figure 2

•Remove the hairpin clips from the outer hole in the weld pins on the handle mounting brackets. Using a pair of pliers, squeeze one leg of the lower handle against the handle mounting bracket. Insert the hairpin clip into the inner hole on the weld pin. Repeat on the other side. See Figure 3.

•After moving the hairpin clip, insert the carriage bolt from hardware pack in the upper hole on the handle mounting bracket and secure with plastic wing nut from the hardware pack. Repeat on other side.

Handle Mounting

Bracket

Bolt

Spark Plug

Wing Nut

Carriage Bolt

Insert Hairpin

Wire

Clip

Hairpin Clip

Weld Pin

Spark

 

Plug Wire

Spark Plug

Figure 1

Setting Up Your Lawn Mower

Assembling Handle

•Lift up and pull back on the upper handle to raise the handle into the operating position. Make certain the lower handle is seated securely into the handle bracket assemblies. Tighten the wing nuts on each side of the handle (carriage bolts must be seated properly into the handle). See Figure 2.

NOTE: Your mower is shipped with the handle in the higher position. If you wish to lower the height of the handle, refer to the Adjustment Section at this time.

Figure 3

•Fasten the cable to the lower handle with the two cable ties found on the lower handle. Pull the cable ties tight and trim off the excess. See Figure 4.

Cable Tie

Lower

Handle

Figure 4

7

Page 6 Page 8
Page 7
Image 7
MTD 11A-545D034 Assembling Your Lawn Mower, Removing Unit From Carton, Loose Parts in Carton, Setting Up Your Lawn Mower
Page 6 Page 8

11A-545D034 specifications

The MTD 11A-545D034 is a versatile and efficient lawn mower designed to meet the diverse needs of homeowners and landscaping professionals alike. With its robust construction and an array of features, this model stands out in the crowded market of outdoor power equipment.

One of the main features of the MTD 11A-545D034 is its powerful Powered lawn mower engine. This engine delivers reliable performance, allowing the mower to easily tackle tough grass and uneven terrain. The 21-inch cutting deck provides a wide cutting path, reducing the time spent mowing large areas. The mower is equipped with adjustable cutting heights, allowing users to customize the grass length to their preference, ensuring a clean and precise cut every time.

In terms of technology, the MTD 11A-545D034 incorporates advanced features that enhance user experience and convenience. The self-propelled drive system allows for effortless maneuvering, even on hilly or uneven terrain. This feature is particularly beneficial for users who may struggle with pushing a mower manually, as it reduces fatigue and enables faster mowing times. Additionally, the mower has a user-friendly control panel that allows easy access to throttle and speed adjustments.

The MTD 11A-545D034 is designed with durability in mind. Its heavy-duty steel construction and high-quality components ensure long-lasting performance, making it a reliable choice for any lawn care task. Moreover, the mower features a corrosion-resistant finish that helps protect it from the elements, ensuring that it looks good and functions well for years to come.

Another key characteristic of the MTD 11A-545D034 is its versatility. This mower can handle a variety of mowing conditions, including thick grass and rough patches. Its efficient grass collection system minimizes clumping and improves airflow, ensuring that the mower continues to operate efficiently while providing a well-manicured lawn.

In conclusion, the MTD 11A-545D034 lawn mower combines power, user-friendly technology, and durable construction. Its self-propelled drive, adjustable cutting heights, and robust engine make it an ideal choice for both residential and professional users. With its ability to tackle various mowing conditions, the MTD 11A-545D034 is a reliable investment for anyone looking to maintain their lawn effectively.
Top Page Image Contents