SECTION 1: IMPORTANT SAFE OPERATION PRACTICES

WARNING: This symbol points out important safety instructions which, if not followed, could endanger the personal safety and/or property of yourself and others. Read and follow all instructions in this manual before attempting to operate this machine. Failure to comply with these instructions may result in personal injury. When you see this symbol - heed its warning.

WARNING: The Engine Exhaust from this product contains chemicals known to the

State of California to cause cancer, birth defects or other reproductive harm.

DANGER: This machine was built to be operated according to the rules for safe operation in this manual. As with any type of power equipment, carelessness or error on the part of the operator can result in serious injury. This machine is capable of amputating hands and feet and throwing objects. Failure to observe the following safety instructions could result in serious injury or death.

TRAINING

•Read, understand, and follow all instructions on the machine and in the manual(s) before attempting to assemble and operate. Keep this manual in a safe place for future and regular reference and for ordering replacement parts.

•Be familiar with all controls and their proper operation. Know how to stop the machine and disengage them quickly.

•Never allow children under 16 years old to operate this machine. Children 16 years old and over should read and understand the operation instructions and safety rules in this manual and should be trained and supervised by a parent.

•Never allow adults to operate this machine without proper instruction.

•Keep bystanders, helpers, pets, and children at least 75 feet from the machine while it is in operation. Stop machine if anyone enters the area.

•Never run an engine indoors or in a poorly ventilated area. Engine exhaust contains carbon monoxide, an odorless and deadly gas.

•Do not put hands and feet near rotating parts or in the feeding chambers and discharge opening. Contact with the rotating impeller can amputate fingers, hands, and feet.

•Never attempt to unclog either the feed intake or discharge opening, remove or empty vacuum bag, or inspect and repair the machine while the engine is running. Shut the engine off and wait until all moving parts have come to a complete stop. Disconnect the spark plug wire and ground it against the engine.

PREPARATION

•Thoroughly inspect the area where the equipment is to be used. Remove all rocks, bottles, cans, or other foreign objects which could be picked up or

thrown and cause personal injury or damage to the machine.

•Always wear safety glasses or safety goggles during operation or while performing an adjustment or repair, to protect eyes. Thrown objects which ricochet can cause serious injury to the eyes.

•Wear sturdy, rough-soled work shoes and close- fitting slacks and shirts. Loose fitting clothes or jewelry can be caught in movable parts. Never operate this machine in bare feet or sandals. Wear leather work gloves when feeding material in the chipper chute.

•Before starting, check all bolts and screws for proper tightness to be sure the machine is in safe working condition. Also, visually inspect machine for any damage at frequent intervals.

•Maintain or replace safety and instructions labels, as necessary.

•To avoid personal injury or property damage use extreme care in handling gasoline. Gasoline is extremely flammable and the vapors are explosive. Serious personal injury can occur when gasoline is spilled on yourself or your clothes which can ignite. Wash your skin and change clothes immediately.

•Use only an approved gasoline container.

•Extinguish all cigarettes, cigars, pipes, and other sources of ignition.

•Never fuel machine indoors.

•Never remove gas cap or add while the engine is hot or running.

•Allow engine to cool at least two minutes before refueling.

•Never over fill fuel tank. Fill tank to no more than 1/2 inch below bottom of filler neck to provide space for fuel expansion.

•Replace gasoline cap and tighten securely.

•If gasoline is spilled, wipe it off the engine and equipment. Move machine to another area. Wait 5 minutes before starting the engine.

3

Page 2 Page 4
Page 3
Image 3
MTD 24A-020D401 manual Important Safe Operation Practices, Training
Page 2 Page 4

24A-020D401 specifications

The MTD 24A-020D401 is a powerful and versatile lawn mower designed to meet the demands of both homeowners and landscaping professionals. This machine is particularly well-suited for medium to large lawns, delivering a cutting experience that combines efficiency with ease of use.

One of the standout features of the MTD 24A-020D401 is its robust 24-inch cutting deck, which allows users to tackle larger areas with fewer passes. This means less time spent mowing and more time enjoying your outdoor space. The cutting deck is made from high-quality steel, ensuring durability and reliability over years of use.

Equipped with a powerful engine, the MTD 24A-020D401 provides consistent performance across various grass types and conditions. The engine typically features a reliable 140cc or 159cc power output, delivering ample torque for efficient grass cutting. It also ensures that the mower can handle uneven terrain, providing a clean cut even in challenging conditions.

One of its defining technologies is the self-propelled drive system, which significantly reduces the effort needed to maneuver the mower. Users can adjust the speed of the mower to match their walking pace, making it a comfortable experience for operators of all ages. This feature is particularly beneficial for those who may struggle with a push mower, as it alleviates physical strain.

The MTD 24A-020D401 incorporates multiple cutting heights, allowing users to select the desired grass height quickly and easily. The deck height adjustment lever typically offers several settings, ranging from 1 inch to 3.5 inches, accommodating various lawn care preferences and seasonal needs.

Additionally, this mower boasts a 3-in-1 cutting capability, allowing for mulching, bagging, or side discharge of clippings. The mulching feature finely chops grass clippings and returns them to the lawn, providing valuable nutrients for healthier grass. The bagging system minimizes mess while collecting clippings for easy disposal, maintaining a neat lawn aesthetic.

User-friendly features, such as easy-to-reach controls and a comfortable handlebar design, enhance the mowing experience. Moreover, the mower is typically designed for easy storage, with a foldable handle that allows for compact storage in a garage or shed.

In conclusion, the MTD 24A-020D401 is a well-rounded lawn mower that combines performance, versatility, and user convenience. With its robust construction, powerful engine, and a range of features designed for ease of use, it stands out as a reliable choice for anyone looking to maintain a pristine lawn.
Top Page Image Contents