•Never store the machine or fuel container inside where there is an open flame, spark, or pilot light (e.g. furnace, water heater, space heater, clothes dryer, etc.)

•To reduce a fire hazard, keep machine free of grass, leaves, or other debris build-up. Clean up oil fuel spillage and remove any fuel soaked debris.

•Allow machine to cool at least 5 minutes before storing.

OPERATION

•Do not put hands and feet near rotating parts or in the feeding chambers and discharge opening. Contact with the rotating impeller can amputate fingers, hands, and feet.

•Before starting the machine, make sure the chipper chute, feed intake, and cutting chamber are empty and free of all debris.

•Thoroughly inspect all material to be shredded and remove any metal, rocks, bottles, cans, or other foreign objects which could cause personal injury or damage to the machine.

•If the impeller strikes a foreign object or if your machine should start making an unusual noise or vibration, immediately shut the engine off. Allow the impeller to come to a complete stop. Disconnect the spark plug wire, ground it against the engine and perform the following steps:

•Inspect for damage.

•Repair or replace any damaged parts.

•Check for any loose parts and tighten to assure continued safe operation.

•Do not allow an accumulation of processed material to build up in the discharge area. This can prevent proper discharge and result in kickback of material through the feed opening.

•Do not attempt to shred or chip material larger than specified on the machine or in this manual. Personal injury or machine damage could result.

•Never attempt to unclog either the feed intake or discharge opening while the engine is running. Shut the engine off, wait until all moving parts have stopped, disconnect the spark plug wire and ground it against the engine before clearing debris.

•Never operate without vacuum bag and discharge chute properly attached to the machine. Never empty or change vacuum bag while the engine is running. Zippered end of vacuum bag must be kept closed at all times during operation.

•Never operate without either the inlet nozzle or optional hose attachment properly attached to the machine. Never attempt to attach or change either attachment while the engine is running.

•Keep all guards, deflectors and safety devices in place and operating properly.

•Keep your face and body back and to the side of the chipper chute while feeding material into the machine to avoid accidental kickback injuries.

•Never operate this machine without good visibility or light. Always be sure of your footing and keep a firm hold on the handles.

•Do not operate this machine on a gravel surface.

•Do not operate this machine while under the influence of alcohol or drugs.

•Muffler and engine become hot and can cause a burn. Do not touch.

•Never pick up or carry machine while the engine is running.

MAINTENANCE AND STORAGE

•Never tamper with safety devices. Check their proper operation regularly.

•Check bolts and screws for proper tightness at frequent intervals to keep the machine in safe working condition. Also, visually inspect machine for any damage and repair, if needed.

•Before cleaning, repairing, or inspecting, stop the engine and make certain the impeller and all moving parts have stopped. Disconnect the spark plug wire and ground it against the engine to prevent unintended starting.

•Do not change the engine governor settings or overspeed the engine. The governor controls the maximum safe operating speed of the engine.

•Maintain or replace safety and instruction labels, as necessary.

•Follow this manual for safe loading, unloading, transporting, and storage of this machine.

•Never store the machine or fuel container inside where there is an open flame, spark or pilot light such as a water heater, furnace, clothes dryer, etc.

•Always refer to the operator’s manual for proper instructions on off-season storage.

•If the fuel tank has to be drained, do this outdoors.

•Observe proper disposal laws and regulations for gas, oil, etc. to protect the environment.

4

Page 3 Page 5
Page 4
Image 4
MTD 24A-020D401 manual Operation
Page 3 Page 5

24A-020D401 specifications

The MTD 24A-020D401 is a powerful and versatile lawn mower designed to meet the demands of both homeowners and landscaping professionals. This machine is particularly well-suited for medium to large lawns, delivering a cutting experience that combines efficiency with ease of use.

One of the standout features of the MTD 24A-020D401 is its robust 24-inch cutting deck, which allows users to tackle larger areas with fewer passes. This means less time spent mowing and more time enjoying your outdoor space. The cutting deck is made from high-quality steel, ensuring durability and reliability over years of use.

Equipped with a powerful engine, the MTD 24A-020D401 provides consistent performance across various grass types and conditions. The engine typically features a reliable 140cc or 159cc power output, delivering ample torque for efficient grass cutting. It also ensures that the mower can handle uneven terrain, providing a clean cut even in challenging conditions.

One of its defining technologies is the self-propelled drive system, which significantly reduces the effort needed to maneuver the mower. Users can adjust the speed of the mower to match their walking pace, making it a comfortable experience for operators of all ages. This feature is particularly beneficial for those who may struggle with a push mower, as it alleviates physical strain.

The MTD 24A-020D401 incorporates multiple cutting heights, allowing users to select the desired grass height quickly and easily. The deck height adjustment lever typically offers several settings, ranging from 1 inch to 3.5 inches, accommodating various lawn care preferences and seasonal needs.

Additionally, this mower boasts a 3-in-1 cutting capability, allowing for mulching, bagging, or side discharge of clippings. The mulching feature finely chops grass clippings and returns them to the lawn, providing valuable nutrients for healthier grass. The bagging system minimizes mess while collecting clippings for easy disposal, maintaining a neat lawn aesthetic.

User-friendly features, such as easy-to-reach controls and a comfortable handlebar design, enhance the mowing experience. Moreover, the mower is typically designed for easy storage, with a foldable handle that allows for compact storage in a garage or shed.

In conclusion, the MTD 24A-020D401 is a well-rounded lawn mower that combines performance, versatility, and user convenience. With its robust construction, powerful engine, and a range of features designed for ease of use, it stands out as a reliable choice for anyone looking to maintain a pristine lawn.
Top Page Image Contents