CONNECTED The terminal has connected with the host computer and is ready to begin
communicating.
CREDIT=0 DEBIT=1 Select "1" for debit transactions, or "0" for credit transactions. Wait for the
next prompt.
CURRENTLY YES
CURRENTLY NO Display that appears following the ENABLE DDOV? Y/N prompt, showing the
current communications DDOV setting (YES or NO). Press [ENTER] to
accept the current setting. Press [9] for YES, or [6] for NO to change the
setting.
CUSTOMER CODE Enter the customer code, up to 25 alphanumeric characters, then press
[ENTER].
CUSTOMER CODE? Y/N Account Range setup option. Select "Y" for the terminal to prompt for entry
of the customer code during specific transactions, or "N" for no prompt.
DEBIT? Y/N Press "Y" to enable debit transactions, or "N" to disable.
DECLINED The host computer has declined authorization of a transaction.
DEMO Y/N Display when you press [FUNC] [3] to place the terminal in Demo mode.
Select "Y" or "N" as desired, then wait for the next prompt.
DESC CODE Enter the descriptor codes, up to four sets, then press [ENTER].
DETAIL Display indicating print Option 1, audit detail, was selected.
DIALING The terminal is dialing the host computer.
DISC SPLIT Y/N
DISC PRIMARY #?
DISC SECOND #?
DISC MERCH ID?
DISC CARD TYPE?
Host setup prompts. If you select "Y" for Discover host split dial, continue
with the remaining prompts. Select "N"to disable split dial.
DOES NOT BALANCE Display indicating the amount keyed in at the time of the Close is not in
agreement with the terminal balance.
Appendix D. Prompts and Error Messages
TRANZ 460 Terminal D - 3