VeriFone TRANZ 460 manual Installation, Single Terminal Configuration

3. TRANZ 460 Terminal

Installation

Single Terminal Configuration

This application can operate in either of two configurations, both using a single telephone line. One configuration consists of a TRANZ 460 terminal and a standard telephone sharing the same telephone line. The other configuration supports up to five terminals per phone line, using a multi-lane traffic controller.

In a single terminal configuration, there are two RS-232 devices: a Data-Over-Voice Multiplexer (DVM) and a printer. The TRANZ 460 terminal can connect to a TRANZport 232 device, which enables it to communicate with the DVM and printer, or both terminal and printer can connect directly to the DVM, provided the printer port on that device is compatible with VeriFone equipment.

Follow these steps to connect your TRANZ 460 terminal to the printer and to the DVM device. Refer also to Appendix F, TRANZport 232, for more complete details of the various serial interface and power cables available to install your DDOV TRANZ 460 terminal. Figures 3-5 through 3-7 illustrate connections to a TRANZport 232 device.

Note: In the following configuration the TRANZ 460 receives its power from the TRANZport 232. The power pack that came with your TRANZ 460 should be used with the TRANZport 232.

Data Connections 1. Using one of the supplied serial interface cables (PN 00446-04), plug the DIN-8 end into the TRANZ 460 serial port. Plug the DB-9 end of this cable into the connector labeled TERMINAL on the TRANZport 232. (See Figure 3-5.)

2.Plug the DIN-8 end of the second supplied serial interface cable into the connector labeled B on the TRANZport 232. The DB-9 end of this cable should be plugged into the DVM (Figure 3-6).

TRANZport 232 (back view)

TRANZ 460

Serial Interface Cable

Figure 3-5. Serial Interface Cable Connection

Note: If connection is via DVM only, the terminal’s RS-232 cable plugs into the DVM’s RS-232 connector. The DVM also features a 25-pin connector for the serial port connection.

TRANZ 460 Terminal 3 - 3