VeriFone TRANZ 460 manual Emptying a Field, Entering Alphanumeric Characters

4. General Programming

"Emptying" a Field

You can easily delete data previously entered in a memory location in the

TRANZ terminal.

1.Press [CLEAR], [BLUE] and [7].

2.Key in the field you wish to delete. The terminal displays the contents already stored in that field.

3.Press [BACKSPACE].

4.Key in "1 [ALPHA] [ALPHA] 66831" and press [ENTER].

5.Press [ENTER] again.

6.The terminal displays that field again as <EMPTY>.

Entering Alphanumeric Characters

Twelve of the terminal’s sixteen keys can be used to enter alphanumeric characters. These characters are the letters A through Z, the numerals 0 through 9, and the following special characters: * , ’ " - . # : : @ and [space].

Press the key containing the desired character, then press [ALPHA] as many times as required to display the correct character.

Note: The terminal must be in a mode that allows data entry, such as the STORE or RECALL modes, before information can be entered from the keypad. Transaction codes which require entry of alpha characters are an exception to this rule.

The following examples demonstrate how the characters 2, A, B, and C are entered using the [2] key and the [ALPHA] key.

Desired
Character	Keys to Press
2	Press the [2] key

APress the [2] key

Press the [ALPHA] key once

BPress the [2] key

Press the [ALPHA] key twice.

CPress the [2] key.

Press the [ALPHA] key three times.

TRANZ 460 Terminal 4 - 3