Appendix B. PINpad 101 Device
Unpacking
Carefully inspect the shipping carton and its content for shipping damage. If the PINpad device was damaged during shipment, immediately file a claim with the shipping company and notify VeriFone, Inc.
Warning: Do not use the PINpad unit if it has been damaged.
1.Remove the PINpad unit from the shipping carton.
2.Remove any protective plastic wrap and place the unit on a table or counter top.
3.Remove the protective plastic wrap from the display panel on the top of the PINpad.
4.Replace all the packing materials, close the lid and save the carton for repacking or moving the PINpad device in the future.
Connecting the PINpad Device to the Terminal
Unplug the terminal power pack before connecting the PINpad 101 device. The PINpad 101 device rear panel has a modular,
Warning: Turn off or unplug the terminal whenever you connect or disconnect the PINpad. Be sure the terminal is not processing data when you cut power. Memory corruption and data loss can result.
Figure B-3 illustrates the PINpad 101 unit connection to a TRANZ 460 terminal.
Plug the cable into the PINpad device connector on the rear of the terminal. Use the rubber grommet (cable cover) to protect the cord. See the lower illustrations for more detail.
1.Connect the modular plug on the PINpad cable to the modular jack on the rear of the PINpad unit.
2.Connect the other end of the cable to the PINpad unit port on the side of the terminal.
3.Spread the grommet open and put it on the cord with the narrow end facing the PINpad device.
Figure B-3. PINpad 101 Device Cable
Connections
TRANZ 460 Terminal | B - 3 |
