VeriFone TRANZ 460 manual Expiry Date Mmyy, Processing Operator ID

6. Standard Key Operations

Display	Response
5. EXPIRY DATE MMYY	Enter the 4-digit expiration date using 2 dig-
	its each for month and year, then press
	[ENTER].
PROCESSING ...

Note: Prompts in Step 6 and Steps 8 through 15 may or may not appear, de- pending on options selected in Setup.

6. OPERATOR ID	Enter the 4-digit operator ID, then press
	[ENTER], or press [ENTER} to bypass this
	prompt.

7.AMOUNT OF SALE ? Enter the amount of the sale without the deci- mal, then press [ENTER].

8.	TAX AMOUNT	Enter the tax amount without a decimal, then
		press [ENTER]. If TAX CALC is enabled, the
		terminal automatically calculates the tax
		based on the tax rate. If both are enabled,
		the TAX AMOUNT overrides tax calculation.
9.	RETAIL TERMS	Enter the 4-digit retail terms, then press
		[ENTER].
10.	PHONE ORDER? Y/N	Enter [9] for "Y" if this is a phone order, or
		[6] for "N" if it is not, then press [ENTER].
		Press [ENTER] only if no Phone Order.
11.	DESC CODE	Enter the descriptor codes, up to 4 sets,
		then press [ENTER].
12.	ENTER INVOICE #	Enter the invoice number up to 8 digits, then
		press [ENTER].
13.	CUSTOMER CODE	Enter the customer code, then press
		[ENTER].
14.	<option prompt #1>	Enter appropriate data, up to 8 alphanumeric
		characters, then press [ENTER].
15.	<option prompt #2>	Enter appropriate data, up to 8 alphanumeric
		characters, then press [ENTER].
	PROCESSING ...
16.	ACCEPTED itm	Record the approval number. Press
		[CLEAR] to return to the idle prompt.
	(itm=trans. item #)
17.	READY **nnn**	The terminal returns to the idle prompt indi-
		cating it is ready for the next transaction.

TRANZ 460 Terminal 6 - 5