VeriFone TRANZ 460 manual Setting the Calendar/Clock

FDC Retail/Debit Purchasing Card Reference Manual

Note: FDC TRANZ software has been designed with ten unique Setup

codes: BLUE + 4 + Codes 0 through 9. You should always use the Setup functions to enter data in the various fields. Use this alternate programming procedure only for entering data in other unique fields such as Fraud Control.

Setting the Calendar/Clock

You can set the calendar/clock after unpacking your new TRANZ 460 terminal. The calendar/clock will not copy when you perform a terminal-to-terminal application copy.

To set the clock, simultaneously press the [*] and [3] keys. Release both keys. The display shows:

Display	Response
DIAGNOSTICS	Press the [ALPHA] key.
RTC CHIP TEST	Respond to each prompt that follows.
YEAR 1980-2079 =	Enter a 2-digit number (94, 95, etc.), then
	press [ENTER].
MONTH =	Enter a number (1–12) representing the
	month, then press [ENTER].
	January = 1
	February = 2
	March = 3, etc.
DAY =	Enter the day of the month, then press
	[ENTER]. You can enter "2" or "02" for
	February 2nd.
HOUR 0-23 =	Enter a number, 0 through 23, to identify the
	hour of the day in 24-hour format, then press
	[ENTER]. Enter "10" for 10 A.M. or "16" for 4
	P.M.
MINUTES =	Enter the number of minutes, from 0 to 59,
	currently past the hour, then press [ENTER].
	For example, enter "14" if the time is 10:14.
SECONDS =	Enter the number of seconds, from 0 to 59,
	currently past the minute, then press
	[ENTER]. For example, enter "23" if the time
	is 10:14 and 23 seconds.

(day of week, date and time)

The terminal displays the new date and time.

Note: If you press the [CLEAR] key at any time before you complete this function, the terminal does not accept any of the data you entered and will default to a "zero out" date and time.

4 - 2 TRANZ 460 Terminal