Setting Group Lockout, Setting the System Hold Time | Uniden USC230

SC230 Paper OM 062206.fm Page 55 Friday, July 21, 2006 7:39 PM

After selecting this option, press 1-9to assign the system to a quick key or press No to assign the system to no quick key, then press E.

Hints:

•You can assign as many systems to the same quick key as you want.

•To be scanned, a system’s quick key must be activated and the system must be unlocked.

Setting Group Lockout

Menu

program system

E

Select the system		E
Edit Sys Option		E
Set Lockout	E

This setting controls whether the system is scanned when its quick key is enabled. Rotate the scroll control to select your setting, then press E.

Locked - the system is not scanned Unlocked - the system is scanned

Note: You can also lock or unlock a system by pressing Func , selecting the system, then pressing Func + L/O.

Setting the System Hold Time

Menu

program system

E

Select the system			E
Edit	Sys	Option	E
Set	Hold	Time	E

This setting controls how many seconds the scanner scans a system before moving to the next unlocked system. Enter a value from 0-255, then press E to save the setting.

Programming/Editing Optional Settings

55

Image 55

Uniden USC230 owner manual Setting Group Lockout, Setting the System Hold Time

Contents

OWNER’S Manual Precautions Precautions SC230 Paper OM 062206.fm Page 3 Friday, July 21, 2006 739 PM Contents Using the Menu Programming Radio Systems Setting Close Call Options Close Call Hits Introduction Introduction Mode Step kHz SC230 Paper OM 062206.fm Page 9 Friday, July 21, 2006 739 PM Feature Highlights Feature Highlights Feature Highlights Auto Store How the Scanner’s Controls Are Represented in This Manual About This Manual Entering Text Understanding the Scanner’s Memory What is Scanning?What is Searching? Understanding Scanning What is CTCSS/DCS? Ctcss Frequencies Hz Conventional Scanning Using the Scanner at the Racetrack Simplex Operation Where To Get More InformationRepeater Operation Information On The Internet Included With Your Scanner Included With Your Scanner Setting Up Your Scanner Setting Up Your ScannerUsing Internal Batteries Using Rechargeable Batteries Using Non-rechargeable Batteries Setting Up Your Scanner Connecting the Antenna Using AC PowerConnecting an Optional Antenna Connecting an Extension Speaker Connecting an Earphone/HeadphoneAttaching the Belt Clip Attaching the Wrist Strap Installing the Demo Software Key Name Description Look At The Keypad + 1-9, 0/Race Selects Rcl Look At The Display Using Func Using MenuUsing the Scroll Control Basic Operation Turning On the Scanner Setting the SquelchBasic Operation Scanning Systems Scanning Preprogrammed Races When You Get To The TrackBefore You Get To The Track Selecting Interference Eliminator Codes Selecting Systems to Scan Locking/Unlocking Systems Selecting System Channel Groups Temporarily Holding On a System Locking/Unlocking ChannelsHolding On a Channel Quickly Recalling Channels Quick-Storing Channels Other Settings Initializing the Scanner’s Memory Using the Backlight Connecting Your Scanner to a Personal Computer Using the PC Control Cloning Options Cloning the Scanner Using the Menu Using the Menu Set up Priority Scan Quickly Programming Racing Systems Programming Radio SystemsProgramming Radio Systems Enter Driver Programming Radio Systems Editing the Car Manually Programming Racing Systems Editing a Driver Entering/Editing a Car Number Editing a Car’s Channel Setting a Car’s Quick KeyDeleting a Car Programming Conventional Systems Setting Lockout On a Car Entering/Editing Conventional Channels Entering/Editing Conventional Channel Groups Programming Radio Systems Editing the System Quick Key Conventional Systems Only System-Level SettingsProgramming/Editing Optional Settings Editing the System Name Setting the System Hold Time Setting Group Lockout Setting Data Skip Setting the Channel Delay Time Entering/Editing the Group Name Group-Level SettingsDeleting Systems Copying Systems Edit Group Select the group Set Quick Key Setting the Group Quick Key Deleting Groups Channel-Level SettingsEditing the Channel Name Conventional Systems Only Setting Channel Priority Setting CTCSS/DCS Setting Channel Alert Setting Channel Modulation Setting the Frequency Step Setting Channel Attenuation Deleting Channels Setting Channel Lockout Copying/Pasting Channels Quick Search Service SearchSearching and Storing Changing the step of Air Band Custom Search CTCSS/DCS Search Custom Frequency MHz Preset Custom Search Range Custom Editing a Custom Search Range Auto Search and Store Storing a System Selecting a System Using the Close Call Feature Using the Close Call Feature Turn the scroll control to select an option Setting Close Call Options Using the Close Call Feature Close Call Hits Unlocking All Frequencies Search and Close Call OptionsManaging Locked-Out Frequencies Searching for Subaudible Tones Setting the Modulation Type Setting the Maximum Auto Store Value Setting Data Skip Setting AttenuationSetting the Delay Time Setting the Search Frequency Step Location Care and MaintenanceCleaning General Use Troubleshooting Troubleshooting Troubleshooting Specifications Specifications Optional Accessories Optional Accessories Collecting Information PlanningPlanning Planning Race Name Filling Out The Racing System WorksheetCar #/Driver-Frequency-Priority-CTCSS/DCS Racing System Worksheet Frequency-Alpha Tag-Priority-CTCSS/DCS Filling Out The Conventional System WorksheetSystem Name and Quick Key Group Name and Quick Key Conventional System W orksheet Conventional System Worksheet Preprogrammed Systems Preprogrammed Systems Declaration of Conformity Declaration of ConformityPage Page Page Uniden Corporation All rights reserved UBZZ01346ZZ0