Setting Channel Lockout, Deleting Channels | Uniden USC230 guide

SC230 Paper OM 062206.fm Page 64 Friday, July 21, 2006 7:39 PM

Setting Channel Lockout

Menu

program system

E

Select the system		E
Edit Group	E
Select the group		E
Edit Channel		E
Select the channel		E
Set Lockout		E

This setting determines whether the scanner will scan this channel when its system and group are enabled. Select your setting, then press E.

Lockout - the channel is not scanned. Unlocked - the channel is scanned. Notes:

•The default setting is Unlocked.

•You can also lock or unlock a channel by selecting it while scanning or holding, then pressing L/O.

See “Basic Operation” on Page 33.

Deleting Channels

Menu

program system

E

Select the system		E
Edit Group	E
Select the group		E
Edit Channel		E
Select the channel		E
Delete Channel		E

The scanner prompts you to confirm deletion. To confirm, press E. To cancel, press No.

Note: Deleted channels cannot be restored. You must re-enter them.

Programming/Editing Optional Settings

64

Image 64

Uniden USC230 owner manual Setting Channel Lockout, Deleting Channels

Contents

OWNER’S Manual Precautions Precautions SC230 Paper OM 062206.fm Page 3 Friday, July 21, 2006 739 PM Contents Using the Menu Programming Radio Systems Setting Close Call Options Close Call Hits Introduction Introduction Mode Step kHz SC230 Paper OM 062206.fm Page 9 Friday, July 21, 2006 739 PM Feature Highlights Feature Highlights Feature Highlights Auto Store About This Manual How the Scanner’s Controls Are Represented in This Manual Entering Text What is Scanning? What is Searching?Understanding Scanning Understanding the Scanner’s Memory What is CTCSS/DCS? Ctcss Frequencies Hz Using the Scanner at the Racetrack Conventional Scanning Simplex Operation Where To Get More InformationRepeater Operation Information On The Internet Included With Your Scanner Included With Your Scanner Setting Up Your Scanner Using Internal BatteriesUsing Rechargeable Batteries Setting Up Your Scanner Using Non-rechargeable Batteries Setting Up Your Scanner Connecting the Antenna Using AC PowerConnecting an Optional Antenna Connecting an Extension Speaker Connecting an Earphone/HeadphoneAttaching the Belt Clip Installing the Demo Software Attaching the Wrist Strap Look At The Keypad Key Name Description + 1-9, 0/Race Selects Rcl Look At The Display Using Func Using MenuUsing the Scroll Control Turning On the Scanner Setting the Squelch Basic OperationScanning Systems Basic Operation Scanning Preprogrammed Races When You Get To The TrackBefore You Get To The Track Selecting Systems to Scan Selecting Interference Eliminator Codes Selecting System Channel Groups Locking/Unlocking Systems Temporarily Holding On a System Locking/Unlocking ChannelsHolding On a Channel Quick-Storing Channels Quickly Recalling Channels Other Settings Using the Backlight Initializing the Scanner’s Memory Using the PC Control Cloning Options Connecting Your Scanner to a Personal Computer Cloning the Scanner Using the Menu Using the Menu Set up Priority Scan Quickly Programming Racing Systems Programming Radio SystemsProgramming Radio Systems Enter Driver Programming Radio Systems Manually Programming Racing Systems Editing the Car Entering/Editing a Car Number Editing a Driver Editing a Car’s Channel Setting a Car’s Quick KeyDeleting a Car Setting Lockout On a Car Programming Conventional Systems Entering/Editing Conventional Channel Groups Entering/Editing Conventional Channels Programming Radio Systems System-Level Settings Programming/Editing Optional SettingsEditing the System Name Editing the System Quick Key Conventional Systems Only Setting Group Lockout Setting the System Hold Time Setting the Channel Delay Time Setting Data Skip Group-Level Settings Deleting SystemsCopying Systems Entering/Editing the Group Name Setting the Group Quick Key Edit Group Select the group Set Quick Key Deleting Groups Channel-Level SettingsEditing the Channel Name Conventional Systems Only Setting Channel Priority Setting Channel Alert Setting CTCSS/DCS Setting Channel Modulation Setting Channel Attenuation Setting the Frequency Step Setting Channel Lockout Deleting Channels Copying/Pasting Channels Service Search Searching and StoringChanging the step of Air Band Quick Search CTCSS/DCS Search Custom Search Preset Custom Search Range Custom Frequency MHz Custom Auto Search and Store Editing a Custom Search Range Selecting a System Storing a System Using the Close Call Feature Using the Close Call Feature Setting Close Call Options Turn the scroll control to select an option Using the Close Call Feature Close Call Hits Search and Close Call Options Managing Locked-Out FrequenciesSearching for Subaudible Tones Unlocking All Frequencies Setting the Maximum Auto Store Value Setting the Modulation Type Setting Data Skip Setting AttenuationSetting the Delay Time Setting the Search Frequency Step Care and Maintenance CleaningGeneral Use Location Troubleshooting Troubleshooting Troubleshooting Specifications Specifications Optional Accessories Optional Accessories Collecting Information PlanningPlanning Planning Race Name Filling Out The Racing System WorksheetCar #/Driver-Frequency-Priority-CTCSS/DCS Racing System Worksheet Filling Out The Conventional System Worksheet System Name and Quick KeyGroup Name and Quick Key Frequency-Alpha Tag-Priority-CTCSS/DCS Conventional System Worksheet Conventional System W orksheet Preprogrammed Systems Preprogrammed Systems Declaration of Conformity Declaration of ConformityPage Page Page Uniden Corporation All rights reserved UBZZ01346ZZ0