Uniden USC230 - page 63

63

Programming/Editing Optional Settings

Setting Channel Attenuation

 program system  E 

Select the system  E 

Edit Group  E 

Select the group  E 

Edit Channel  E 

Select the channel  E 

Set Attenuator  E

This setting controls whether the scanner attenuates

signals on this channel. Select your setting, then press E.

On - the channel is attenuated by about 18 dB.

Off - the channel is not attenuated.

Notes:

• The default setting is Off.

• You can also toggle this setting by holding on the

channel and pressing and E.

Setting the Frequency Step

 program system  E 

Select the system  E 

Edit Group  E 

Select the group  E 

Edit Channel  E 

Select the channel  E 

Set Step  E

This setting selects the frequency step used for setting

the channel's. Select your setting, then press E.

Auto - the step is based on the band (see the table at the

front of the manual)

5.0 kHz, 6.25 kHz, 7.5 kHz, 8.33 KHZ, 10.0 kHz, 12.5

kHz, 15.0 kHz, 20.0 kHz, 25.0 kHz, 50.0 kHz, 100.0

kHz - The scanner uses the selected step.

Note: The scanner defaults to Auto.

Menu

Func

Menu

SC230 Paper OM 062206.fm Page 63 Friday, July 21, 2006 7:39 PM

Contents

Main Precautions Precautions Precautions WARNI NG! Contents Contents Page Page Introduction Introduction Page Page Feature Highlights Feature Highlights General Page Auto Store Priority Backlight and Power Key Controls About This Manual Entering Text Understanding Scanning Understanding Scanning Understanding the Scanners Memory What is Scanning? What is Searching? What is CTCSS/DCS? Page Using the Scanner at the Racetrack Conventional Scanning Simplex Operation Repeater Operation Where To Get More Information Information On The Internet Included With Your Scanner Included With Your Scanner Included With Your Scanner Setting Up Your Scanner Setting Up Your Scanner Using Internal Batteries Using Rechargeable Batteries Using Non-rechargeable Batteries WARNING! Using AC Power Connecting the Antenna Connecting an Optional Antenna Connecting an Earphone/Headphone Connecting an Extension Speaker WARNING! Attaching the Belt Clip Attaching the Wrist Strap Installing the Demo Software A Look At The Keypad Page Page A Look At The Display Using Menu Using Func Using the Scroll Control Basic Operation Basic Operation Turning On the Scanner and Setting the Squelch Scanning Systems Scanning Preprogrammed Races Before You Get To The Track When You Get To The Track Selecting Driver Frequencies Holding on a Car Selecting Systems to Scan Selecting System Channel Groups Locking/Unlocking Systems Locking/Unlocking Channels Temporarily Holding On a System Holding On a Channel Quick-Storing Channels Quickly Recalling Channels Other Settings Other Settings Displaying System Information Adjusting the Key Beep Locking/Unlocking the Keypad Turning Power Save On or Off Using the Backlight Initializing the Scanners Memory Using the PC Control and Cloning Options Page Using the Menu Using the Menu Using the Menu Programming Radio Systems Programming Radio Systems Quickly Programming Racing Systems Page Page Manually Programming Racing Systems Page Page Programming Conventional Systems Entering/Editing Conventional Channel Groups Setting Up a Channel Group Edit Group E New Group E Page System-Level Settings Page Page Group-Level Settings Page Channel-Level Settings Page Page Page Page Page Page Searching and Storing Searching and Storing Service Search Changing the step of Air Band Quick Search CTCSS/DCS Search Custom Search Preset Custom Search Range Page Editing a Custom Search Range Auto Search and Store Selecting a System Storing a System Using the Close Call Feature Using the Close Call Feature Setting Close Call Options Page Close Call Hits Search and Close Call Options Search and Close Call Options Managing Locked-Out Frequencies Searching for Subaudible Tones Search and Close Call Options Setting the Maximum Auto Store Value Setting the Modulation Type Setting Attenuation Setting Data Skip Setting the Delay Time Search and Close Call Options Setting the Search Frequency Step Care and Maintenance Care and Maintenance Care and Maintenance General Use Location Troubleshooting Troubleshooting Troubleshooting If your USC230 is not performing properly, try these steps. Problem Possible Cause Suggestion Page Specifications Specifications Specifications Page Planning Planning Collecting Information Page Page Page Filling Out The Conventional System Worksheet System Name and Quick Key Group Name and Quick Key Frequency-Alpha Tag-Priority-CTCSS/DCS Page Preprogrammed Systems Preprogrammed Systems Preprogrammed Systems Declaration of Conformity Declaration of Conformity Declaration of Conformity