SC230 Paper OM 062206.fm Page 80 Friday, July 21, 2006 7:39 PM
Care and Maintenance
General Use
•Turn the scanner off before disconnecting the power.
•Always write down the programmed frequencies in the event of memory loss.
•If memory is lost, simply reprogram each channel.
•Always press each button firmly until you hear the entry tone for that key entry.
Location
•Do not use the scanner in
•Avoid placing the unit in direct sunlight or near heating elements or vents.
•If the scanner receives strong interference or electrical noise, move it or its antenna away from the source of the noise. If possible, a higher elevation might provide better reception.
•Also try changing the height or angle of the antenna.
Cleaning
•Disconnect the power to the unit before cleaning.
•Clean the outside of the scanner with a mild detergent.
•To prevent scratches, do not use abrasive cleaners or solvents. Be careful not to rub the LCD window.
•Do not use excessive amounts of water.
Repairs
Do not attempt any repair. The scanner contains no user serviceable parts.
Care and Maintenance
80
